Contribution of the Tribal Study to the Effectiveness of the Wool Fiber Composite Compared to Fiberglass Composite Materials

Abstract:

In the field of economic and ecological material research which can replace the composite material currently used in several fields such as glass wool, research leads to a comparison of the mechanical properties and the quality of plates made from recycled materials with those of glass wool, in particular in terms of surface condition and geometric precision thus. In this study, we recycled and used damaged wool fibers in a composite material; the results showed that the new product has mechanical characteristics similar to those of fiberglass composite materials. The recycling of wool fiber reduces the cost of a product made of composite materials, with the possibility of a later study of the machinability of the plates made from this material and its use in various sectors.

• Periodical: Defect and Diffusion Forum (Volume 406)
• Pages: 492-504
• DOI: https://doi.org/10.4028/www.scientific.net/DDF.406.492
• Online since: January 2021
• Authors: Noureddine Kacimi, Ahmed TAFRAOUI*
• Keywords: Bending Test, Compression, Glass Cloth, Polyester Resin, Shear Module, Vibration Analysis Method, Wool Fiber, Young's Module

References

[1] L. Gornet, Généralités sur les matériaux composites, HAL Id. 00470296, last revised 19 May (2011).

[2] M. Haddad, R. Zitoune, F. Eyma, B. Castanié, Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites, Experimental Mechanics, ISSN: 0014-4851, 2015, Volume 55, Number 3.

DOI: 10.1007/s11340-014-9967-y

[3] S. Dif, Conception et modélisation par éléments finis d'une pâle d'éolienne à axe horizontal, Thèse Master académique université Ziane Achour de Djelfa, 26/06/(2013).

[4] A. Mir, B. Bezzazi, Redouane Zitoune, Francis Collombet. Caractérisation mécanique d'un panneau sandwich à âme en liège et peaux jute/époxy. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. p.25. hal-00597889.

[5] A. Giocosa, Les composites dans l'industrie automobile, technique de l'ingénieur Réf: AM5600 V2, 10 avril (1999).

[6] J. Cinquin, Les composites en aérospatiale, technique de l'ingénieur Réf: AM5645 V1, 10 avril (2002).

[7] F. Berbain. A. Chevalier, Mise en œuvre des composites- Méthodes et matériels, technique de l'ingénieur Réf : A3720 v1, 10 Avril (1997).

DOI: 10.51257/a-v1-a3720

[8] F. Gibson, Modal vibration response measurements for characterization of composite materials and structures, Composites science and technology, Réf 60(15) 2769-2780, (2000).

DOI: 10.1016/s0266-3538(00)00092-0

[9] A. Chaoufi, A. Tafraoui, M. Zaoui, S. Tafraoui, M. Dahmani, Recherche des paramètres de coupe pour l'usinage des Nouveaux Bétons, International Journal of Mechanical and Production, Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.7, Issue 6, Nov 2017, 321-332.

DOI: 10.24247/ijmperddec201736

[10] S. Tafraoui, A. Tafraoui, Contribution à l'étude des performances des moules en bétons pour la fabrication des pièces en Matériaux composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001 Vol. 8, 4 Aug (2018).

DOI: 10.24247/ijmperdaug201852

[11] R. Várdai, T. Lummerstorfer, C. Pretschuh, M. Jerabek, B. Pukánszky, Reinforcement of PP with polymer fibers: Effect of matrix characteristics, fiber type and interfacial adhesion Polymer, Volume 1902, March 2020, Article 122203.

DOI: 10.1016/j.polymer.2020.122203

[12] A. Daoui, A. Meslem, Zerizer, R. Marchal, Identification Des Fréquences De Résonance et Du Module D'élasticité Par la Méthode D'analyse Vibratoire, ENSET. Oran 12-14/10/(2009).

[13] C. Bathias et coll, Matériaux composites, Editions Dunod ISBN 2 10 0063987, (2005).

[14] L. Berreur, B. de Maillard, S. Nösperger, L'industrie française des matériaux composites, Etude stratégique réalisée pour le compte de la DiGITIP / SIM Rév. 2 du 13 mai (2002).

[15] Chung-Shin Chang, Turning of glass-fiber reinforced plastics materials with chamfered main cutting edge carbide tools, journal of materials processing technology, vol.180, pp.117-129, (2006).

DOI: 10.1016/j.jmatprotec.2006.05.011

[16] G. Chardon, H. Chanal, E. Duc, Usinage de finition de moules en matériaux composites avec outil hémisphérique : mise en évidence d'un seuil de rugosité, Intercut 2010–6ème assises MUGV, Cluny, France, Octobre 13-15, (2010).

[17] G. Chardon, H. Chanal, E. Duc, Surface finishing of mold in fiber reinforced composites with a ball end cutter tool, detection of a minimum reachable alue of roughness, Eighth international Conference on High Speed Machining, Metz, France, December 8-10, (2010).

[18] M. Abdelyamine, Dynamic analysis free of plate's multilayer composite, Memory of magister, Mentouri, Constantine, (2009).

[19] M. Zaoui, A. Tafraoui, A. Chaoufi, S. Tafraoui & M. DAHMANI, The realization of thin sheets stamping tools with an economical material, International Journal of Mechanical and Production, Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.7, Issue 6, Dec 2017, 437-444.

DOI: 10.24247/ijmperddec201750

[20] M. Rokbi, Z. Rahmouni. and B. Baali, Performance of polymer concrete incorporating waste marble and alfa fibers, Advances in Concrete Construction, Vol. 5, No. 4 (2017) 331-343.

DOI: 10.31648/ts.4583

[21] M.R. Sanjay, P. Madhu, M. jawaid, Characterization and properties of natural fiber polymer Composites, journal of cleaner production volume 172, 20 January 2018 pages 566-b b 581.

DOI: 10.1016/j.jclepro.2017.10.101

[22] A. Brochocka, A Nowak, K. Majchrzycka, M. Puchalski, and S. Sztajnowski, Multifunctional Polymer Composites Produced by Melt-Blown Technique to Use in Filtering Respiratory Protective Devices, Materials Journal, 2020, 13, 712;.

DOI: 10.3390/ma13030712

[23] A. Hallonet, Développement et caractérisation d'un matériau composite à base de fibres de lin Application au renforcement de structures en béton par collage externe, thèse de doctorat de l'université de Lyon (2016).

DOI: 10.51257/a-v1-c2264

[24] G. Wang, D. Zhang, G. Wan, B. Li, G. Zhao, Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability polymer, Volume 18124 October 2019 Article 121803.

DOI: 10.1016/j.polymer.2019.121803

[25] B. Tab, M. Djermane, I. Bekkar, The Digital Investigation on the Behavior of a Composite Material's Structure is requested by an Effort Type ' Shock ',, International Journal of Advances in Mechanical and Civil Engineering, ISSN: 2394-2827 Volume 6, Issue 2, Apr (2019).

[26] B. Tab, M. Djermane, I. Bekkar, A. Tafraoui, Experimental Study of the Behavior of a Stitched Sandwich plate under a rapid Dynamics Shock,, International Journal of Civil Engineering and Technology (IJCIET), V 8, Issue 12, December 2017, p.185–193, Article ID: IJCIET_08_12_021.