Investigation of Al₂O₃-Modified Aluminide on 304SS: Microstructural Evolution, Hardness and Growth Kinetic through Slurry Aluminizing

Abstract:

The microstructure and growth kinetic of alumina (Al₂O₃)-modified aluminide coating were investigated at 650°C, 680°C, and 700°C for various durations (4, 6, 8, and 10 hours) using the slurry aluminizing process. The heat-treated samples were analyzed through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) to assess microstructural evolution, elemental composition, and phases of the coating. SEM observations revealed a two-layer aluminide coating, comprising an Al-rich intermetallic (FeAl₃) and a Fe-rich intermetallic (FeAl). Microhardness tests showed that FeAl₃ had hardness values ranging from 880 to 990 HV, while FeAl, with values between 610 and 700 HV. The growth kinetics indicated that the thickness of the aluminide layers increased with both the aluminizing temperature and time, following a parabolic growth law. The activation energy for the growth of FeAl was 343.15 kJ/mol.

• Periodical: International Journal of Engineering Research in Africa (Volume 72)
• Pages: 1-12
• DOI: https://doi.org/10.4028/p-qPDN4Z
• Online since: December 2024
• Authors: Ibrahim Owolabi Ambali, Siew Min Tan, Muhamamad Afifi Jalaluddin, Abu Seman Anasyida*, Tuti Katrina Abdullah, Brij Kumar Dhindaw
• Keywords: 304SS, Activation Energy, Hardness, Intermetallic, Slurry Aluminizing

References

[1] S. Kumar, S. Majumdar, B. Paul, J. Kishor, V. Kain, Kinetics of formation of pack aluminized coating on 9Cr1Mo steel and interdiffusional behaviour of iron aluminides at intermediate temperatures, Surf. Coatings Technol. 426 (2021) 127794.

DOI: 10.1016/j.surfcoat.2021.127794

[2] S.P. Chakraborty, Development of Protective Coating of MoSi2 over TZM Alloy Substrate by Slurry Coating Technique, Mater. Today Proc. 3 (2016) 3071–3076.

DOI: 10.1016/j.matpr.2016.09.022

[3] K. Beck, A.S. Ulrich, A.K. Czerny, E.M.H. White, M. Heilmaier, M.C. Galetz, Aluminide diffusion coatings for improving the pesting behavior of refractory metals, Surf. Coatings Technol. 476 (2024) 130205.

DOI: 10.1016/j.surfcoat.2023.130205

[4] M. Reza Bateni, S. Shaw, P. Wei, A. Petric, Deposition of Fe-Al intermetallic coatings on solid oxide fuel cell (SOFC) interconnects by pack cementation, Mater. Manuf. Process. 24 (2009) 626–632.

DOI: 10.1080/10426910902769012

[5] J. Dong, Y. Sun, F. He, Formation mechanism of multilayer aluminide coating on 316L stainless steel by low-temperature pack cementation, Surf. Coatings Technol. 375 (2019) 833–838.

DOI: 10.1016/j.surfcoat.2019.08.005

[6] J. Lu, Y. Dang, J. Huang, Y. Zhou, Z. Yang, J. Yan, Y. Yuan, Y. Gu, Preparation and characterization of slurry aluminide coating on Super304H boiler tube in combination with heat-treatment process, Surf. Coatings Technol. 370 (2019) 97–105.

DOI: 10.1016/j.surfcoat.2019.04.061

[7] Y. Sun, J. Dong, P. Zhao, B. Dou, Formation and phase transformation of aluminide coating prepared by low-temperature aluminizing process, Surf. Coatings Technol. 330 (2017).

DOI: 10.1016/j.surfcoat.2017.10.025

[8] Y. Yang, F. Zhang, J. He, Y. Qin, B. Liu, M. Yang, F. Yin, Microstructure, growth kinetics and mechanical properties of interface layer for roll bonded aluminum-steel clad sheet annealed under argon gas protection, Vacuum 151 (2018) 189–196.

DOI: 10.1016/j.vacuum.2018.02.018

[9] T.N. Prasanthi, C. Sudha, P.S. Reddy, Hot dip aluminization of 304L SS and P91 ferritic-martensitic steel – Comparison of interface morphology and growth kinetics of reaction zones, Surf. Coatings Technol. 440 (2022) 128465.

DOI: 10.1016/j.surfcoat.2022.128465

[10] M.S. Zare Mohazabie, F. Shahriari Nogorani, The addition of zirconium to aluminide coatings: The effect of the aluminide growth mode, Surf. Coatings Technol. 378 (2019) 125066.

DOI: 10.1016/j.surfcoat.2019.125066

[11] T. Wang, C. Chen, J. Ma, S. Wei, M. Xiong, F. Mao, P. Zhang, G. Zhang, Influence of Si on the intermetallic compound formation in the hot-dipped aluminide medium carbon steel, Mater. Charact. 197 (2023) 112700.

DOI: 10.1016/j.matchar.2023.112700

[12] C. Boulesteix, F. Pedraza, Characterisation of aluminium diffusion coatings elaborated on austenitic stainless steels and on ferritic-martensitic steels, Surf. Coatings Technol. 339 (2018) 27–36.

DOI: 10.1016/j.surfcoat.2018.01.086

[13] T. Yener, A. Erdogan, M.S. Gök, S. Zeytin, Formation, characterization, and wear behavior of aluminide coating on mirrax® ESR steel by low-temperature aluminizing process, J. Tribol. 143 (2021).

DOI: 10.1115/1.4047667

[14] M.K. Javan, A. Azizi Moghaddam, M. Farvizi, A.R. Abbasian, K. Shirvani, S.M.M. Hadavi, M.R. Rahimipour, Effect of aluminum to alumina particles size ratio on the microstructural aspects of aluminide coatings by LTHA pack cementation, Mater. Res. Express 6 (2019) 096437.

DOI: 10.1088/2053-1591/ab320f

[15] J. Lu, J. Huang, J. Wang, Z. Yang, Y. Gu, Long-term degradation behavior of slurry aluminide coating on Super304H stainless steel at 650 °C, Corros. Sci. 178 (2021) 109054.

DOI: 10.1016/j.corsci.2020.109054

[16] S.H. Shim, H. Pouraliakbar, B.J. Lee, Y.K. Kim, M.S. Rizi, S.I. Hong, Strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation, Mater. Sci. Eng. A 853 (2022).

DOI: 10.1016/j.msea.2022.143729

[17] M. Saboktakin Rizi, H. Minouei, B.J. Lee, M.R. Toroghinejad, S.I. Hong, Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloys, J. Alloys Compd. 911 (2022) 9–11.

DOI: 10.1016/j.jallcom.2022.165108

[18] J.L. Song, S.B. Lin, C.L. Yang, C.L. Fan, Effects of Si additions on intermetallic compound layer of aluminum-steel TIG welding-brazing joint, J. Alloys Compd. 488 (2009) 217–222.

DOI: 10.1016/j.jallcom.2009.08.084

[19] M.A. Jalaluddin, A.A. Seman, T.K. Abdullah, Z. Hussain, Effect of aluminium and alumina ratio of aluminide coating on 304 stainless steel by slurry aluminizing, Mater. Today Proc. 66 (2022) 2849–2855.

DOI: 10.1016/j.matpr.2022.06.528

[20] F. Zarei, H. Nuranian, K. Shirvani, Characterization, growth kinetics and high-temperature oxidation behavior of aluminide coating formed on HH309 stainless steel by casting and subsequent heat treatment, Intermetallics 120 (2020) 106742.

DOI: 10.1016/j.intermet.2020.106742

[21] Z. Shi, J. Cao, F. Han, Preparation and characterization of Fe-Al intermetallic layer on the surface of T91 heat-resistant steel, J. Nucl. Mater. 447 (2014) 77–81.

DOI: 10.1016/j.jnucmat.2013.12.027

[22] S. Kobayashi, T. Yakou, Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment, Mater. Sci. Eng. A 338 (2002) 44–53.

DOI: 10.1016/s0921-5093(02)00053-9

[23] F.D. Troysi, P.P. Brito, Development and characterization of an iron aluminide coating on mild steel substrate obtained by friction surfacing and heat treatment, Int. J. Adv. Manuf. Technol. 111 (2020) 2569–2576.

DOI: 10.1007/s00170-020-06310-w

[24] R.M. Triani, L.F.D.A. Gomes, R.J.T. Aureliano, A.L. Neto, G.E. Totten, L.C. Casteletti, Production of Aluminide Layers on AISI 304 Stainless Steel at Low Temperatures Using the Slurry Process, J. Mater. Eng. Perform. 29 (2020) 3568–3574.

DOI: 10.1007/s11665-020-04748-3

[25] S. Guo, Z.B. Wang, L.M. Wang, K. Lu, Lower-temperature aluminizing behaviors of a ferritic–martensitic steel processed by means of surface mechanical attrition treatment, Surf. Coatings Technol. 258 (2014) 329–336.

DOI: 10.1016/j.surfcoat.2014.09.005

[26] I. Yakubtsov, R. Sohmshetty, Evolution of Al-Si Coating Microstructure during Heat-Treatment of Usibor ® 1500, (2018).

DOI: 10.1088/1757-899x/418/1/012015

[27] J.T. John, R.S. Srinivasa, P.K. De, A kinetic model for iron aluminide coatings by low-pressure chemical vapor deposition: Part I. Deposition kinetics, Thin Solid Films 466 (2004) 339–346.

DOI: 10.1016/j.tsf.2004.02.042