The Dynamics of the Inertial Conveyor

Abstract:

The paper presents the results of the study of bodies movement on a rough surface, which carries out longitudinal and transverse oscillations. The design of the inertial conveyor for reducing dynamic loads has been proposed. The dependences of the acceleration of the longitudinal oscillations of the chute and the speed of the transverse oscillations of the chute walls on dimensionless time τ=ωt have been obtained. As a result of the kinematic analysis of the mechanism of the reciprocating movement of the chute, the dependences of the movement, speed and acceleration of the chute of the inertial conveyor on the angle of rotation of the crank and its rotation frequency have been obtained. As a result of the conducted theoretical studies, it has established that when the chute of the inertial conveyor is given transverse oscillations during periods of time and when the load slides along the surface of the chute, the productivity of this vehicle significantly increases. The obtained dependencies can be used in the design of inertial conveyors with given technical and economic indicators.

• Periodical: International Journal of Engineering Research in Africa (Volume 72)
• Pages: 35-46
• DOI: https://doi.org/10.4028/p-FiV8k6
• Online since: December 2024
• Authors: Leonid Serilko, Oleg Lyashuk*, Zoia Sasiuk, Mariana Sokol, Dmitriy Serilko, Katerina Pryndiuk, Anna Tson, Taras Dzhyvak
• Keywords: Averaging Method, Chute, Dry Friction, Frequency, Inertial Conveyor, Oscillations

References

[1] Blekhman I.I., Dzhanelidze G.Yu, Vibratory Movement, Nauka (1964).

[2] Blekhman I.I, Vibrational mechanics, Fizmatlit (1994).

[3] Dyakonova V.Ya, Dynamic and kinematic parameters of the movement of the inertial conveyor trough, Perspective materials, technologies, designs, economics, Krasnoyarsk (2004) 203-213.

[4] Dyakonova V.Ya., Kuzmenko V.A., Bratukhina N.A, Experimental studies of inertial conveyor with flexible traction, Scientific and technical progress, Krasnoyarsk (1994).

[5] Dyakonova V.Ya., Kalinovskaya T.G., Kosolapova S.A., Dyakonov M.N, Statement of the problem of studying the drive of an inertial conveyor with variable stiffness rods, Mountain Journal. 1 (2014) 118–122.

[6] Aipov R.S., Shagargazin A.S, Oscillating conveyor based on a linear electric drive for transporting and drying grain, Materials of the 110th scientific-practical conference of teachers, staff and graduate students of the university, Ufa (2004) 160.

[7] V. Korendiy, et al., Mathematical modeling of forced oscillations of semidefinite vibro-impact system sliding along rough horizontal surface, Vibroengineering PROCEDIA. 39 (2021) 164–169.

DOI: 10.21595/vp.2021.22298

[8] Z. Xiao, J. Cao, and Y. Yu, Mathematical modeling and dynamic analysis of planetary gears system with time-varying parameters, Mathematical Problems in Engineering (2020) 1–9.

DOI: 10.1155/2020/3185624

[9] Gaberson, H. A., Particle motion on oscillating conveyors-part 2. practical solutions to the equations of motion and the extension of the theory to beds of granular material (1972) 57–63.

DOI: 10.1115/1.3428155

[10] S.F. Pylypaka, I.Yu. Hryshchenko, T.S. Pylypaka, Study of the motion of a particle along the inner surface of an inclined cylinder rotating around its own axis, Motrol, Motoryzacjai energetika rolnictwa, Lublin 12 (2010) 113–126.

DOI: 10.31548/machenergy.13(2).2022.32-40

[11] Popov, M., et al., Reduction of friction by normal oscillations, Friction 5 (2017) 45–55.

DOI: 10.1007/s40544-016-0136-4

[12] Benad, J., et al., Active control of friction by transverse oscillations, Friction 7 (2018) 1–12.

DOI: 10.1007/s40544-018-0202-1

[13] Benad, J., et al., Stiff and soft active control of friction by vibrations and their energy efficiency. Forsch, Ingenieurw 82 (2018) 331–339.

DOI: 10.1007/s10010-018-0281-1

[14] Popov, M., The Influence of Vibration on Friction: A Contact-Mechanical Perspective, Front. Mech. Eng 69 (2020).

DOI: 10.3389/fmech.2020.00069

[15] Cao, H.X., et al., Micromotor Manipulation Using Ultrasonic Active Traveling Waves. Micromachines 12, 192 (2021).

DOI: 10.3390/mi12020192

[16] Palencia, J.L.D., TravellingWaves Approach in a Parabolic Coupled System for Modelling the Behaviour of Substances in a Fuel Tank. Appl. Sci. 11 (2021).

DOI: 10.3390/app11135846

[17] Kilikevicius, S., et al., Manipulation of Miniature and Microminiature Bodies on a Harmonically Oscillating Platform by Controlling Dry Friction. Micromachines 12 (2021).

DOI: 10.3390/mi12091087

[18] Kilikevicius, S., et al., Analysis on Conveying of Miniature and Microparts on a Platform Subjected to Sinusoidal Displacement Cycles with Controlled Dry Friction. Mechanika 28 (2022) 38-44.

DOI: 10.5755/j02.mech.28195

[19] Kilikevicius, S., Fedaravicius, A., Vibrational Transportation on a Platform Subjected to Sinusoidal Displacement Cycles Employing Dry Friction Control. Sensors 21 (2021).

DOI: 10.3390/s21217280

[20] R. Pohrt, Friction Influenced by Vibrations: A Refined Contact-Mechanics View on Lateral and Rotational Oscillations. Frontiers in Mechanical Engineering 6 (2020).

DOI: 10.3389/fmech.2020.566440

[21] Lyashuk, O., et al., The investigation of a physical pendulum motion, which move along a horizontal axis. Bulletin of the Karaganda University Physics 106 (2022) 75-85.

DOI: 10.31489/2022Ph1/75-85

[22] Blekhman, L., et al., Engineering model of the vibrational transportation process. Vibroengineering procedia 32 (2020) 26–31.

DOI: 10.21595/vp.2020.21519

[23] R.M. Rohatynskyi, et al., Study of the dynamics of inertial conveyors, All-Ukrainian Scientific and Technical Journal Vibrations in Engineering and Technologies, Vinnytsia 2 (89) (2018) 41 – 48.

[24] Serilko L. S., et al., The research of inertial conveyor transitional chute oscillations influence on its technical and economic indicators, Resource-saving technologies of raw-material base development in mineralmini: multi-authored monograph, Petrosani, Romania Universitas Publishing (2020) 293-309.

[25] Y. Liu, et al., Vibration response of the planetary gears with a float sun gear and influences of the dynamic parameters, Shock and Vibration (2020) 1–17.

DOI: 10.1155/2020/8886066

[26] Jan, A., Sanders Ferdinand Verhulst James Murdock, Averaging Methods in Nonlinear Dynamical Systems 2 (2007) 432.

[27] V. Korendiy et al., Kinematic and dynamic analysis of three-mass oscillatory system of vibro-impact plate compactor with crank excitation mechanism, Vibroengineering Рrocedia, 40 (2022) 14–19.

DOI: 10.21595/vp.2022.22393

[28] Mzaki Dakel, Jean-Jacques Sinou Stability and nonlinear self-excited friction-induced vibrations for a minimal model subjected to multiple coalescence patterns 5 international ltd. journal of vibroengineering. 19 (2017) 604-628.

DOI: 10.21595/jve.2016.17190

[29] Janke E., Emde F., Lesh F. Special functions, Nauka (1968) 344.

[30] G. Filimonikhin, et al., The dynamics of a resonance single-mass vibratory machine with a vibration exciter of targeted action that operates on the Sommerfeld effect, Eastern-European Journal of Enterprise Technologies 3 (111) (2021) 51–58

DOI: 10.15587/1729-4061.2021.233960

[31] J. Koc, et al., Analysis of the Causes of Failure and Material Analysis of Components of the Screw Conveyor of a Coal Boiler for Steam Production, Key Engineering Materials. 923 (2022) 147–153.

DOI: 10.4028/p-b7k1a3

[32] N. Liem, et al., EPDM/SBR Blends for Skim Compound of Steel Cord Conveyor Belt: Mechanical Properties, Thermal Stability and Adhesion Level, Key Engineering Materials. 889 (2021) 135-143.

DOI: 10.4028/www.scientific.net/KEM.889.135