Sealability Analysis of Aged Elastomer O-Rings for Usage in Solar Thermochemical Water-Splitting Reactors

Abstract:

Fluoroelastomer (FKM) and perfluoroelastomer (FFKM) O-rings are to be employed for the construction of a gate valve in a solar thermochemical water-splitting reactor for hydrogen production. To assess the O-rings’ sealing performance during the first stage of the gate valve’s closing process, the compressive response of the materials under the applied gate forces is determined. An accelerated ageing program at 200, 225 and 250 °C for FKM and 250, 275 and 300 °C for FFKM is performed on compressed O-rings and non-compressed O-ring segments for up to 14 days. The aged O-rings’ sealing performance at low forces, and hence at low compressive strain, is evaluated by conducting leakage rate tests in vacuum using a newly developed test stand. Experimental results provide for the tested O-rings data of a minimum compression necessary to guarantee efficient sealing at different thermo-oxidative ageing levels. To investigate the materials’ degradation extent, weight loss measurements are performed on the exposed O-ring segments. In all cases, cumulative weight loss increases with longer exposure times and higher temperatures, while the weight loss rate decreases with exposure time.

• Periodical: Key Engineering Materials (Volume 1007)
• Pages: 37-48
• DOI: https://doi.org/10.4028/p-P5fm2q
• Online since: March 2025
• Authors: Estefanía Vega Puga*, Stefan Brendelberger, Fabio Pierno, Janine Wischek, Christian Sattler
• Keywords: Fluoroelastomer, Leakage, Perfluoroelastomer, Solar Fuels, Thermo-Oxidative Ageing

References

[1] Zoller, S., Koepf, E., Nizamian, D., Stephan, M., Patané, A., Haueter, P., Romero, M.l, González-Aguilar, J., Lieftink, D., Wit, E., Brendelberger, S., Sizmann, A., and Steinfeld, A., "A solar tower fuel plant for the thermochemical production of kerosene from H2O and CO2." Joule Vol. 6 No. 7 (2022): p.1606–1616.

DOI: 10.1016/j.joule.2022.06.012

[2] Brendelberger, S., Holzemer-Zerhusen, P., Vega Puga, E., Roeb, M., and Sattler, C., "Study of a new receiver-reactor cavity system with multiple mobile redox units for solar thermochemical water splitting." Solar Energy Vol. 235 (2022): p.118–128.

DOI: 10.1016/j.solener.2022.02.013

[3] Battini, D., Donzella, G., Avanzini, A., Zenoni, A., Ferrari, M., Donzella, A., Pandini, S., Bignotti, F., Andrighetto, A., and Monetti, A., "Experimental testing and numerical simulations for life prediction of gate valve O-rings exposed to mixed neutron and gamma fields." Materials & Design Vol. 156 (2018): p.514–527.

DOI: 10.1016/j.matdes.2018.07.020

[4] Kömmling, A., Jaunich, M., Goral, M., and Wolff, D., "Insights for lifetime predictions of O-ring seals from five-year long-term aging tests." Polymer Degradation and Stability Vol. 179 (2020): p.109278.

DOI: 10.1016/j.polymdegradstab.2020.109278

[5] Kömmling, A., Jaunich, M., Pourmand, P., Wolff, D., and Hedenqvist, M., "Analysis of O-Ring Seal Failure under Static Conditions and Determination of End-of-Lifetime Criterion." Polymers Vol. 11 No. 8 (2019).

DOI: 10.3390/polym11081251

[6] Kömmling, A., Jaunich, M., Pourmand, P., Wolff, D., and Gedde, U. W., "Influence of Ageing on Sealability of Elastomeric O‐Rings." Macromolecular Symposia Vol. 373 No. 1 (2017).

DOI: 10.1002/masy.201600157

[7] Kader, M. A. and Bhowmick, A. K., "Thermal ageing, degradation and swelling of acrylate rubber, fluororubber and their blends containing polyfunctional acrylates." Polymer Degradation and Stability Vol. 79 No. 2 (2003): p.283–295.

DOI: 10.1016/S0141-3910(02)00292-6

[8] Simon, A., Pepin, J., Berthier, D., and Méo, S., "Degradation mechanism of FKM during thermo-oxidative aging from mechanical and network structure correlations." Polymer Degradation and Stability Vol. 208 (2023): p.110271.

DOI: 10.1016/j.polymdegradstab.2023.110271

[9] Sugama, T., Pyatina, T., Redline, E., McElhanon, J., and Blankenship, D., "Degradation of different elastomeric polymers in simulated geothermal environments at 300 °C." Polymer Degradation and Stability Vol. 120 (2015): p.328–339.

DOI: 10.1016/j.polymdegradstab.2015.07.010

[10] Zhuo, W. Y., Wang, Q. L., Li, G., Yang, G., Zhang, H., Xu, W., Niu, Y. H., and Li, G. X., "Detection of the Destruction Mechanism of Perfluorinated Elastomer (FFKM) Network under Thermo-oxidative Aging Conditions." Chinese Journal of Polymer Science Vol. 40 No. 5 (2022): p.504–514.

DOI: 10.1007/s10118-022-2692-6

[11] C. Otto Gehrckens GmbH & Co. KG, "Technisches Datenblatt Vi 665.". COG, Pinnenberg, Germany (2024). https://www.cog.de/uploads/tx_datenblattgenerator/pdf/de/vi-665.pdf.

[12] C. Otto Gehrckens GmbH & Co. KG, "Technisches Datenblatt Perlast G75B.". COG, Pinnenberg, Germany (2021). https://www.cog.de/uploads/tx_datenblattgenerator/pdf/de/ perlast-g75b.pdf.

[13] ISO 7743:2017, "Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties." International Organization for Standarization, Geneva, Switzerland. https://www.iso.org/standard/72784.html#lifecycle.

[14] ISO 188:2023, "Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests." International Organization for Standarization, Geneva, Switzerland. https://www.iso.org/standard/80468.html.

DOI: 10.3403/01316115u

[15] Kömmling, A., "Alterung und Lebensdauervorhersage von O-Ring-Dichtungen." Dissertation. TU Berlin, Berlin, Germany.

[16] Moore, D. F. and Geyer, W., "A review of hysteresis theories for elastomers." Wear Vol. 30 No. 1 (1974): p.1–34.

DOI: 10.1016/0043-1648(74)90055-6

[17] C. Otto Gehrckens GmbH & Co. KG, "O-ring Basics: Everything about O-rings.". COG, Pinnenberg, Germany (2022). https://www.cog.de/fileadmin/dokumente/Broschueren/COG_ Broschuere_O-Ring_1x1_EN.pdf.

[18] Eriks, "Technical Handbook of O-rings." (2024). https://o-ring.info/en/technical-info/technical-o-ring-handbook/.

[19] ISO 48-4:2018, "Rubber, vulcanized or thermoplastic — Determination of hardness: Part 4: Indentation hardness by durometer method (Shore hardness)." International Organization for Standarization, Geneva, Switzerland. https://www.iso.org/standard/74969.html.

DOI: 10.3403/30373384u

[20] Huang, X., Gu, J., Li, M., Yu, X., Liu, Y., and Xu, G., "A Leakage Prediction Model for Sealing Performance Assessment of EPDM O-Rings under Irradiation Conditions." Polymers Vol. 15 No. 14 (2023).

DOI: 10.3390/polym15143073

[21] Yamada, Y. and Sogo, S., "Evaluation of Temperature Dependency of Gas Permeability on Various Kinds of Elastomers." Journal of the Vacuum Society of Japan Vol. 60 No. 12 (2017): p.502–506.

DOI: 10.3131/jvsj2.60.502

[22] Hertz, D. L., "Evaluating thermal stability of fluoroelastomers via strain energy density." Sealing Technology Vol. 2005 No. 9 (2005): p.5–9.

DOI: 10.1016/S1350-4789(05)70895-3