Synthesis and Characterization of Nanocrystalline PZT Powders by a Simple Sol-Gel Method

Abstract:

Nanocrystalline lead zirconate titanate (PZT) powders with composition at the morphotropic phase boundary (MPB) were synthesized by a simple aqueous based sol-gel method, using lead nitrate, zirconium nitrate and tetrabutyl titanate as the starting materials. The sol could be easily transformed into gel, firstly heated at 120°C for 10h, then at 180°C for 24h. The thermal decomposition process of the gel was investigated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. The effect of citrate addition amount on the calcining temperature was discussed. The results reveal that pure perovskite phase PZT powders can be obtained at a calcining temperature as low as 600°C. The average grain size of the powders was determined by transmission electron microscope and X-ray diffraction. The influences of calcining temperature and the pH value of the solution on the grain size were investigated. The sintering temperature and electrical properties of the ceramics derived by nano-powders were compared with those prepared by the conventional ceramic processing. The result shows that using the nanopowder, the sintering temperature could be reduced by about 100°C and the ferroelectric properties were enhanced.

• Periodical: Key Engineering Materials (Volumes 512-515)
• Pages: 147-152
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.512-515.147
• Online since: June 2012
• Authors: Shao Peng Zhang, Xiao Hui Wang, Long Tu Li
• Keywords: Nanocrystalline Powder, PZT, Sol-Gel (SG)

References

[1] J. F. Scott, Applications of modern ferroelectrics, Science Vol. 315[5814] (2007) pp.954-959.

[2] C. H. Ahn, K. M. Rabe, and J. M. Triscone, Ferroelectricity at the Nanoscale: Local Polarization in Oxide Thin Films and Heterostructures, Science Vol. 303[5657] (2004) pp.488-491.

DOI: 10.1126/science.1092508

[3] G. L. Messing and A. J. Stevenson, Toward pore-free ceramics, Science Vol. 322[5900] (2008) pp.383-384.

DOI: 10.1126/science.1160903

[4] K. Lu, Sintering of nanoceramics, Int. Mater. Rev. Vol. 53[1] (2008) p.21.

[5] X.H. Wang and I. W. Chen, Sintering of Nanoceramics, in Yury Gogotsi (Eds.), Nanomaterials Handbook , CRC Press, Boca Raton, USA, 2006, p.12.

[6] R. Chaim, M. Levin, A. Shlayer, et al., Sintering and densification of nanocrystalline ceramic oxide powders: a review, Adv. Appl. Ceram. Vol. 107[3] (2008) pp.159-169.

DOI: 10.1179/174367508x297812

[7] Y. Saito, H. Takao, T. Tani, et al., Lead-free piezoceramics, Nature Vol. 432[7013] (2004) pp.84-87.

DOI: 10.1038/nature03028

[8] J. Frantti, Notes of the Recent Structural Studies on Lead Zirconate Titanate, J. Phys. Chem. B Vol.112[21] (2008) pp.6521-6733.

DOI: 10.1021/jp711829t

[9] A. Suarez-Gomez, R. Sato-Berru, R. A. Toscano, et al.: J. Alloy. Compd. Vol.450[1-2] (2008) p.380.

[10] S. Linardos, Q. Zhang, and J. R. Alcock, Preparation Of Sub-Micron PZT Particles With The Sol-Gel Technique, J. Eur. Ceram. Soc. Vol. 26[1-2] (2006) pp.117-123.

DOI: 10.1016/j.jeurceramsoc.2004.10.007

[11] Y. Faheem and M. Shoaib, Sol–Gel Processing and Characterization of Phase-Pure Lead Zirconate Titanate Nano-Powders, J. Am. Ceram. Soc. Vol.89[6] (2006) pp.2034-2037.

DOI: 10.1111/j.1551-2916.2006.01002.x

[12] R. M. Piticescu, A. M. Moisin, D. Taloi, V. Badilita, and et al., Hydrothermal synthesis of ultradisperse PZT powders for polar ceramics, J. Eur. Ceram. Soc. Vol.24[6] (2004) pp.931-935.

DOI: 10.1016/s0955-2219(03)00545-4

[13] A. Y. Wu, P. M. Vilarinho, I. M. M. Salvado, and et al., Sol–Gel Preparation of Lead Zirconate Titanate Powders and Ceramics: Effect of Alkoxide Stabilizers and Lead Precursors, J. Am. Ceram. Soc. Vol.83[6] (2000) pp.1379-1385.

DOI: 10.1111/j.1151-2916.2000.tb01397.x

[14] M. Kakihana, L. Borjesson, S. Eriksson, and et al., Fabrication and characterization of highly pure and homogeneous YBa2Cu3O7 superconductors from sol-gel derived powders, J. App. Phys. Vol.69[2] (1991) pp.867-873.

DOI: 10.1063/1.347325

[15] Y. K. Sun, Synthesis and Electrochemical Studies of Spinel Li1.03Mn2O4 Cathode Materials Prepared by a Sol-Gel Method for Lithium Secondary Batteries, Solid State Ionics Vol. 100[1-2] (1997) pp.115-125.

DOI: 10.1016/s0167-2738(97)00311-1

[16] Z. X. Yue, J. Zhou, L. T. Li, et al., Synthesis of nanocrystalline NiCuZn ferrite powders by sol-gel auto-combustion method, J. Magn. Mater., Vol. 208[1-2] (2000) pp.55-60.

DOI: 10.1016/s0304-8853(99)00566-1

[17] W. Zhao, X.H. Wang, J. Hao, et al., Preparation and Characterization of Nanocrystalline (1-x)BiScO3-xPbTiO3 Powder, J. Am. Ceram. Soc., Vol. 89[4] (2006) pp.1200-1204.