Evaluation of Timber-Concrete Floor Performance under Occupant-Induced Vibrations Using Continuous Monitoring

Abstract:

This paper describes the design of a system to monitor floor vibrations in an office building and an analysis of several months worth of collected data. Floors of modern office buildings are prone to occupant-induced vibrations. The contributing factors include long spans, slender and flexible designs, use of lightweight materials and low damping. As a result, resonant frequencies often fall in the range easily excited by normal footfall loading, creating potential serviceability problems due to undesirable levels of vibrations. This study investigates in-situ performance of a non-composite timber-concrete floor located in a recently constructed innovative multi-storey office building. The floor monitoring system consists of several displacement transducers to measure long-term deformations due to timber and concrete creep and three accelerometers to measure responses to walking forces, the latter being the focus of this paper. Floor response is typically complex and multimodal and the optimal accelerometer locations were decided with the help of the effective independence-driving point residue (EfI-DPR) technique. A novel approach to the EfI-DPR method proposed here uses a combinatorial search algorithm that increases the chances of obtaining the globally optimal solution. Several months worth of data collected by the monitoring system were analyzed using available industry guidelines, including ISO2631-1:1997(E), ISO10137:2007(E) and SCI Publication P354. This enabled the evaluation of the floor performance under real operating conditions.

• Periodical: Key Engineering Materials (Volumes 569-570)
• Pages: 230-237
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.569-570.230
• Online since: July 2013
• Authors: Piotr Omenzetter, Varun Kohli, Yohann Desgeorges
• Keywords: Floor Vibrations, Human Induced Vibration, Monitoring, Serviceability Assessment, Timber-Concrete Floors

References

[1] P. Omenzetter, H. Morris, M. Worth, A. Gaul, S. Jager, Y. Desgeorges, Assessment of dynamic and long-term performance of an innovative multi-story timber building via structural monitoring and dynamic testing, in: Proceedings of SPIE Smart Structures and Materials/Nondestructive Evaluation and Health Monitoring, SPIE, Bellingham, 2012, pp. 83452P-1-19.

DOI: 10.1117/12.914535

[2] B.O. Aalami, Vibration Design of Concrete Floors for Serviceability, ADAPT Corporation, Redwood City, (2008).

[3] Y. Matsumoto, S. Sato, T., Nishioka, H. Shiojiri, A study on dynamic design of pedestrian over-bridges, Transactions of the Japan Society of Civil Engineers 4 (1972) 50-51.

DOI: 10.2208/jscej1969.1972.205_63

[4] P. Samarajiva, D. Choudhuri, Vibration study of a proposed fitness center adjacent to a server room, in: Proceedings of the Fifth Congress of Forensic Engineering, ASCE, Reston, 2009, pp.318-324.

DOI: 10.1061/41082(362)32

[5] K.A. Salyards, L.M. Hanagan, C.A. Kim, A unique vibration serviceability case study of a complex structure, in: Building Integration Solutions, ASCE, Reston, 2006, pp.1-8.

DOI: 10.1061/40798(190)33

[6] D.R. Huston, B. Esser, J.O. Plumpton, X. Zhao, Monitoring of microfloor vibrations in a new research building, in: Proceedings of SPIE Smart Structures and Materials/Nondestructive Evaluation and Health Monitoring, SPIE, Bellingham, 2002, pp.237-245.

DOI: 10.1117/12.470732

[7] M. Meo, G. Zumpano, On the optimal sensor placement techniques for a bridge structure, Engineering Structures 27 (2005) 1488-1497.

DOI: 10.1016/j.engstruct.2005.03.015

[8] D.C. Kammer, M.L. Tinker, Optimal placement of triaxial accelerometers for modal vibration tests, Mechanical Systems and Signal Processing 18 (2004) 29-41.

DOI: 10.1016/s0888-3270(03)00017-7

[9] International Organization for Standardization, ISO2631-1: 1997(E): Mechanical vibration and shock – Evaluation of human exposure to whole body vibration, Part 1: General requirements, International Organization for Standardization, Geneva, (1997).

DOI: 10.3403/30197820

[10] International Organization for Standardization, ISO10137: 2007(E): Bases for design of structures - Serviceability of buildings and walkways against vibrations, International Organization for Standardization, Geneva, (2007).

[11] A.L. Smith, S.J. Hicks, P.J. Devine, SCI Publication P354: Design of floors for vibrations: A new approach, Steel Construction Institute, Silwood Park, (2009).