The Methodic of Testing Using Experimental Equipment

Martin Kubelka; Tomáš Pačák; František Tatíček

doi:10.4028/www.scientific.net/KEM.635.94

Paper Titles

New Austenitic Creep Resistant Steels for Superheaters of USC Boilers
p.75

Comparison of Experimental Stamping Punch Machinability Made out of Unconventional Materials
p.81

Facesheet-Core Interface Delamination in Sandwich Panels
p.85

Possibilities of Preparing Tools Working in Conditions of Abrasion Wear with the Modification of the Tool Surfaces by Nitridation
p.89

The Methodic of Testing Using Experimental Equipment
p.94

Influence of the Strain Rate and Heat Treatment on the Mechanical Properties of Steel Sheets
p.100

High Temperature Oxidation of 9-12% Cr Materials P91 and P92 in Supercritical Water
p.106

Cleanness and Mechanical Properties of Steel after Remelting under Different Slags by ESR
p.112

IF Steel Effect of Rate Deformation on the Fracture Surface Change
p.118

HomeKey Engineering MaterialsKey Engineering Materials Vol. 635The Methodic of Testing Using Experimental...

The Methodic of Testing Using Experimental Equipment

Abstract:

During pressing using high speed, the material is stressed to the limit of its mechanical properties. And this generates problems during production. For this reason, opens debate on the factors previously neglected, such as the strain rate. For determining the effect of strain rate on the pressing process has been designed to CTU, Faculty of Mechanical Engineering, Institute of Manufacturing Technology, equipment for monitoring the behaviour of the material at different strain rates. The article describes the creation of testing methodologies material behaviour using this device.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 635)

Pages:

94-99

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.635.94

Citation:

Cite this paper

Online since:

December 2014

Authors:

Martin Kubelka*, Tomáš Pačák, František Tatíček

Keywords:

Formability, Strain Rate, Surface Forming

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] M Šlais, Studium vlivu rychlostních a teplotních parametrů na tvařitelnost Ti slitin. Brno, 2012. Dizertační práce. Vysoké učení technické v Brně.

Google Scholar

[2] ČSN EN ISO 14556. Ocel - Zkouška rázem v ohybu na kyvadlovém kladivu tyčí Charpy s V-vrubem: Instrumentovaná zkušební metoda. Praha: Český normalizační institut, 2001.

Google Scholar

[3] T. Pilvousek, Vliv vybraných šarží materiálu DC06 na tvařitelnost při plošné, tváření. Praha, 2009. 96 s. Diplomová práce. ČVUT v Praze.

Google Scholar