Performance Based Specifications for Durability of Mass Concrete Blocks Subjected to Harsh Arabian Gulf Marine Environment

Abstract:

Concrete structures in the Eastern region of Saudi Arabia are exposed to the harsh Arabian Gulf environment, and they suffer from deterioration due to accelerated corrosion of the reinforcing steel resulting in reduced service life. The service life of reinforced concrete structures in this environment is strongly affected by the quality of concrete. The resistances of concrete to chloride penetration, the chloride threshold for corrosion initiation and corrosion rate of the reinforcing steel are critical in ensuring long-term durability of concrete structures. In order to ensure that the concrete functions in the harsh environment for which it is expected to meet the service life requirement, the concrete must be designed for durability performance. A prescriptive concrete specification emphasizing on limits on mix parameters is generally ineffective for durability issues. A performance based specification based on concrete quality represented by durability indices and compliance criteria measured on cast-in-place concrete provides a framework for the contractor and ready-mix concrete supplier to produce a structure meeting the stipulated service life by the client. This paper presents the results of experimental investigations conducted for mass-concrete blocks used in the quay walls off the coastline on a reclaimed land. For long-term durability, a concrete mix in which 50% and 70% of cement was replaced by ground blast furnace slag was used to cater for the durability performance requirements.

• Periodical: Key Engineering Materials (Volume 711)
• Pages: 444-452
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.711.444
• Online since: September 2016
• Authors: K. Rahman Muhammad*, Al Omran Zaki, Ibrahim Mohammed, Al Nahdi Fahad, S. Barry Mohammed
• Keywords: Durability, Durability Indices, Ground Blast Furnace Slag, Marine Environment, Mass Concrete Blocks, Performance-Based Specifications, Quay Wall

References

[1] S. Guzmána, J. C. Galveza, and J. M. Sanchob, Cover cracking of reinforced concrete due to rebar corrosion induced by chloride penetration, Cem. and Concr. Res. 41(8) (2011) 893-902.

DOI: 10.1016/j.cemconres.2011.04.008

[2] F. Rasheeduzzafar, H. Dakhil, A. S. Al-Gahtani, Corrosion of Reinforcement in Concrete Structures in the Middle East, Concrete International: Des. and Constr. 7(9) (1985) 48-55.

[3] A. A. Ramezanianpour and V. M. Malhotra, Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporation slag, fly ash or silica fume, Cem. Concr. Compos., 17 (1995) 125-133.

DOI: 10.1016/0958-9465(95)00005-w

[4] G. J. Osborne, Durability of portland blast-furnace GGBS cement concrete, Cement and Concrete Composites, 21 (1999) 11-21.

DOI: 10.1016/s0958-9465(98)00032-8

[5] R. Luo, Y. Cai, C. Wang and X. Huang, Study of chloride binding and diffusion in GGBS concrete, Cement and Concrete Composites, 33(1) (2003) 1-7.

DOI: 10.1016/s0008-8846(02)00712-3

[6] K Yun Yeau and E. Kyum Kim, Corrosion Resistance of Concrete with Ground Granulated Blast-Furnace Slag, Cement and Concrete Composites, 33(7), (2005) 1391-1399.

DOI: 10.1016/j.cemconres.2004.11.010

[7] ASTM C 39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, V 4. 02 ASTM, Philadelphia, USA (2005).

[8] ASTM C 469, Standard Test Method for Static Modulus of Elasticity and Poissons Ratio of Concrete in Compression, Annual Book of ASTM Standards, V 4. 02, Philadelphia, USA (2005).

DOI: 10.1520/c0469_c0469m-14

[9] ASTM C 157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, Annual Book of ASTM Standards, V 4. 02, Philadelphia, USA (2005).

[10] ASTM C 1202, Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, Annual Book of ASTM Standards, V 4. 02, Philadelphia, USA (2005).

DOI: 10.1520/jte12075j

[11] NordTest Build 492, Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments, NordTest, (1999).

[12] ASTM C 1585, Measurement of Rate of Absorption of Water by Hydrolic Cement Concretes, Annual Book of ASTM Standards, V 4. 02, ASTM, Philadelphia, USA (2005).

[13] L. Gengying and Z. Xiaohua, Properties of concrete incorporating fly ash and ground granulated blast-furnace GGBS, Cement Concrete Compos. 25 (2003) 293–299.

DOI: 10.1016/s0958-9465(02)00058-6