Degradation of Glass Fiber Reinforced Polymer (GFRP) Material Exposed to Tropical Atmospheric Condition

Abstract:

Fibre reinforced polymers (FRPs) have emerged as popular materials for structural application in recent decades due to numerous of advantages. Despite the growing body of research on the use of glass fibre reinforced polymers (GFRP) composites in repairing and retrofitting the important structures such as oil and gas pipelines, the lack of comprehensive data on the long-term degradation mechanism for these materials is still impeding their widespread use in open-air structures repairs particularly in tropical climate locations such as Malaysia. Therefore, this paper presents an experimental investigation to determine the influence of tropical atmospheric condition on tensile properties of the GFRP. In this study, a set of GFRP samples were fabricated using epoxy resin as polymer matrix and woven E-glass fibres as reinforcing materials. These samples were exposed to tropical atmospheric condition in Malaysia for a period of four months. Tensile test was carried out for each sample before and after four-months period of exposure. The experimental tensile test results recorded a 15% reduction in tensile strength after 4 months of exposure as compared to its original strength. Further, the dominant failure mode of the exposed sample was characterized with longitudinal splitting of the fibres without completely breaking out. Overall, the tropical atmospheric condition has a noticeable impact on the GFRPs tensile strength degradations over the exposure duration.

• Periodical: Key Engineering Materials (Volume 879)
• Pages: 265-274
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.879.265
• Online since: March 2021
• Authors: Mousay Mohammed, Yew Ying Chai, Shu Ing Doh, Kar Sing Lim*
• Keywords: Atmospheric, Degradation, GFRP, Tensile Strength, Tropical Condition

References

[1] Zhu HG, Leung CK, Kim JK, Liu MY. Tensile properties degradation of GFRP composites containing nanoclay in three different environments. J Compos Mater 2012;46:2179–92.

DOI: 10.1177/0021998311430424

[2] Rohem NRF, Pacheco LJ, Budhe S, Banea MD, Sampaio EM, de Barros S. Development and qualification of a new polymeric matrix laminated composite for pipe repair. Compos Struct 2016;152:737–45.

DOI: 10.1016/j.compstruct.2016.05.091

[3] Sing LK, Azraai SNA, Yahaya N, Zardasti L, Md Noor N. Strength development of epoxy grouts for pipeline rehabilitation. J Teknol 2017;79:9–14.

DOI: 10.11113/jt.v79.9339

[4] Rajak DK, Pagar DD, Menezes PL, Linul E. Fiber-reinforced polymer composites: Manufacturing, properties, and applications. Polymers (Basel) 2019;11.

DOI: 10.3390/polym11101667

[5] Azraai SN, Lim KS, Yahaya N, Zardasti L, Husain MK, Noor NM. Effect of Silica Sand Filler on Mechanical Properties of Epoxy Grout for Composite Repair of Steel Pipelines. Mater Perform Charact 2020;9:1–8.

DOI: 10.1520/mpc20190111

[6] Da Costa Mattos HS, Reis JML, Paim LM, Da Silva ML, Amorim FC, Perrut VA. Analysis of a glass fibre reinforced polyurethane composite repair system for corroded pipelines at elevated temperatures. Compos Struct 2014;114:117–23.

DOI: 10.1016/j.compstruct.2014.04.015

[7] Zainal N, Arifin HH, Zardasti L, Yahaya N, Sing LK, Noor NM. Mechanical properties of graphene-modified epoxy grout for pipeline composite repair. Int J Integr Eng 2018;10:176-84.

DOI: 10.30880/ijie.2018.10.04.028

[8] Bere P, Dudescu M, Neamtu C, Nemes O, Moldovan C, Simion M. Fabrication and Mechanical Characterization of Short Fiber-Glass Epoxy Composites. Mater Perform Charact 2019; 8:163–74.

DOI: 10.1520/MPC20180171

[9] Lim kar S, Zardasti L, Noor NM, Yahaya N. Mechanical properties of graphene nanoplatelets-reinforced epoxy grout in repairing damaged pipelines. Mater Sci Forum 2019; 962 MSF: 242–8.

DOI: 10.4028/www.scientific.net/MSF.962.242

[10] Wang J, GangaRao H, Liang R, Zhou D, Liu W, Fang Y. Durability of glass fiber-reinforced polymer composites under the combined effects of moisture and sustained loads. J Reinf Plast Compos 2015; 34:1739–54.

DOI: 10.1177/0731684415596846

[11] Frigione M, Lettieri M. Durability issues and challenges for material advancements in FRP employed in the construction industry. Polymers (Basel) 2018;10.

DOI: 10.3390/polym10030247

[12] Arifina HH, Nurfarahin Z, Zardastia L, Yahayaa N, Lim Kar S, Noora NM. Jurnal Teknologi MECHANICAL PROPERTIES OF NANOTUBES-MODIFIED EPOXY GROUT FOR. J Teknol 2019;3:169–76.

[13] Bazli M, Jafari A, Ashrafi H, Zhao XL, Bai Y, Singh Raman RK. Effects of UV radiation, moisture and elevated temperature on mechanical properties of GFRP pultruded profiles. Constr Build Mater 2020;231:117137.

DOI: 10.1016/j.conbuildmat.2019.117137

[14] Hota G, Barker W, Manalo A. Degradation mechanism of glass fiber/vinylester-based composite materials under accelerated and natural aging. Constr Build Mater 2020; 256: 119462.

DOI: 10.1016/j.conbuildmat.2020.119462

[15] Ray BC. Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites. J Colloid Interface Sci 2006;298:111–7.

DOI: 10.1016/j.jcis.2005.12.023

[16] Bagherpour S. Fibre Reinforced Polyester Composites. Polyester, 2012, p.135–66.

DOI: 10.5772/48697

[17] Kajorncheappunngam S, Gupta RK, Gangarao HVS. Effect of aging environment on degradation of glass-reinforced epoxy. J Compos Constr 2002;6:61–9.

DOI: 10.1061/(asce)1090-0268(2002)6:1(61)

[18] Sampath Rao P, Manzoor Husain M, V. Ravi Shankar D. An Investigation on Strength Degradation of Gfrp Laminates Under Environmental Impact. Int J Compos Mater 2012;2:48–52.

DOI: 10.5923/j.cmaterials.20120204.02

[19] Keller T, Bai Y, Valĺe T. Long-term performance of a glass fiber-reinforced polymer truss bridge. J Compos Constr 2007;11:99–108.

DOI: 10.1061/(asce)1090-0268(2007)11:1(99)

[20] Sousa JM, Correia JR, Cabral-Fonseca S. Durability of Glass Fibre Reinforced Polymer Pultruded Profiles: Comparison Between QUV Accelerated Exposure and Natural Weathering in a Mediterranean Climate. Exp Tech 2013:n/a-n/a.

DOI: 10.1007/s40799-016-0024-x

[21] Almusallam TH, Al-Salloum YA, Alsayed SH, El-Gamal S, Aqel M. Tensile properties degradation of glass fiber-reinforced polymer bars embedded in concrete under severe laboratory and field environmental conditions. J Compos Mater 2013;47:393–407.

DOI: 10.1177/0021998312440473

[22] Heinrick M, Crawford B MA. Degradation of Fibreglass Composites under Natural Weathering Conditions. MOJ Polym Sci 2017;1:18–24.

[23] ASTM International. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials D3039. vol. 15. West Conshohocken, USA: American Society for Testing and Materials; (2014).

[24] Helbling C, Karbhari VM. Durability Assessment of Combined Environmental Exposure and Bending. ACI Spec Publ 2005; 230: 1397–418.

[25] Chennareddy R, Tuwair H, Kandil UF, ElGawady M, Reda Taha MM. UV-resistant GFRP composite using carbon nanotubes. Constr Build Mater 2019; 220: 679–89.

DOI: 10.1016/j.conbuildmat.2019.05.167

[26] Lu T, Solis-Ramos E, Yi Y, Kumosa M. UV degradation model for polymers and polymer matrix composites. Polym Degrad Stab 2018;154:203–10.

DOI: 10.1016/j.polymdegradstab.2018.06.004

[27] Liu TQ, Liu X, Feng P. A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects. Compos Part B Eng 2020; 191: 107958.

DOI: 10.1016/j.compositesb.2020.107958

[28] Mourad AHI, Beckry Mohamed AM, El-Maaddawy T. Effect of seawater and warm environment on glass/epoxy and glass/polyurethane composites. Appl Compos Mater 2010;17:557–73.

DOI: 10.1007/s10443-010-9143-1