Investigating the Melt-Pool Temperature Evolution in Laser-Powder Bed Fusion by Means of Infra-Red Light: A Review

Abstract:

Recent decades seen the success of Additive Manufacturing (AM) in many industrial applications including aerospace, biomedical, automotive, and tooling. In the manufacturing of metallic parts, AM technology has the ability to produce parts with complex geometries which are difficult or impossible to produce using the conventional fabrication methods, such as machining and casting. Another benefit of AM is the employment of metal and metal alloys which are difficult to machine. Alloys such as titanium, nickel-titanium, and stainless steel have a wide range of applications particularly in the aerospace and biomedical industry. Selective Laser Melting (SLM), also known as Laser Powder Bed Fusion (L-PBF) is a type of AM technology used for the 3D printing of metal and alloy parts. The major drawback in L-PBF technology is the anisotropic properties of the produced parts. From L-PBF, these anisotropies exist due to instant melting and re-solidification of the metal powder, the ultra-high cooling rates and the variant temperature levels across the build layers and within the single layer itself. This article explores the essential role of the melt-pool temperature and temperature gradients that occur during the L-PBF process and their effects on the additively manufactured part’s properties.

• Periodical: Key Engineering Materials (Volume 926)
• Pages: 235-241
• DOI: https://doi.org/10.4028/p-6fn67z
• Online since: July 2022
• Authors: Muhannad Ahmed Obeidi*, Inam Ul Ahad, Dermot Brabazon
• Keywords: Infra-Red (IR) Data, Laser Powder Bed Fusion, Melt-Pool Temperature, Selective Laser Melting (SLM), Thermal Residual Stresses

References

[1] ASTM International, (2009), Standard Terminology for Additive Manufacturing Technologies,, Designation: F2792 − 12a.

[2] El Hassanin A., Ahmed Obeidi M., Scherillo F., Brabazon D., CO2 laser polishing of laser-powder bed fusion produced AlSi10Mg parts,, Surface & Coatings Technology 419 (2021) 12729, doi.org/10.1016/j.surfcoat.2021.127291.

DOI: 10.1016/j.surfcoat.2021.127291

[3] Salman, O.; Gammer, C.; Chaubey, A.K.; Echert, J.; Scudino, S. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting. Mater. Sci. Eng. A 2019, 748, 205–212.

DOI: 10.1016/j.msea.2019.01.110

[4] Schmidt, M.; Merklein, M.; Bourell, D.; Dimitrov, D. Laser based additive manufacturing in industry and academia. Manuf. Technol. 2017, 66, 561–583.

DOI: 10.1016/j.cirp.2017.05.011

[5] A. Obeidi M., Uı´ Mhurchadha S. M., Conway A., C. Souto, D. Tormey, et al., Comparison of the porosity and mechanical performance of 316L stainless steel manufactured on different laser powder bed fusion metal additive manufacturing machines,, Journal of Materials Research and Technology, 2021 ; 13 : 2361-2374, https://doi.org/10.1016/j.jmrt.2021.06.027.

DOI: 10.1016/j.jmrt.2021.06.027

[6] A. Oeidi M., Mussatto A., Groarke R., Vijayaraghavan R. K., A. Conway et al., Comprehensive assessment of spatter material generated during selective laser melting of stainless steel,, Mater. Today Commun., vol. 25, no. May, p.101294, 2020,.

DOI: 10.1016/j.mtcomm.2020.101294

[7] A. Obeidi M., Monu M., Hughes C., Bourke D, Nur Dogu M., Francis J., Zhang M., Ul Ahad I., Brabazon D., Laser beam powder bed fusion of nitinol shape memory alloy (SMA),, journal of materials research and technology 2021;14:2554-2570, doi.org/10.1016/j.jmrt.2021.07.126.

DOI: 10.1016/j.jmrt.2021.07.126

[8] Gora W.S.; Tian, Y.; Cabo, A.P.; Ardron, M.; Maier, R.R.; Prangnell, P.;Weston, N.J.; Hand, D.P. Enhancing surface finish of additively manufactured titanium and cobalt chrome elements using laser based finishing. Phys. Procedia 2016, 83, 258–263.

DOI: 10.1016/j.phpro.2016.08.021

[9] Obeidi MA, McCarthy E, O'Connell B, Ahad IU, Brabazon D. Laser polishing of additive manufactured 316L stainless steel synthesized by selective laser melting. Materials (Basel) 2019;12(6). https://doi.org/10.3390/ma12060991.

DOI: 10.3390/ma12060991

[10] Muhannad A Obeidi, The Innovation of Laser Polishing, The Open Access Journal of Science and Technology, vol9, ArticleID101e110, 01pages, (2021).

[11] J.C. Heigel, B.M. Lane, Measurement of the melt pool length during single scan tracks in a commercial Laser Powder Bed Fusion Process, J. Manuf. Sci. Eng.Trans. ASME 140 (5) (2018) 1–8.

DOI: 10.1115/1.4037571

[12] Mahato V., et al., Detecting voids in 3D printing using melt pool time series data,, Journal of Intelligent Manufacturing, https://doi.org/10.1007/s10845-020-01694-8.

DOI: 10.1007/s10845-020-01694-8