Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution

Hikaru Nagata; Masa Ono; Yasuyuki Miyazawa; Yuji Hayashi; Yoshio Bizen

doi:10.4028/www.scientific.net/MSF.1016.997

Paper Titles

Preliminary Development of Cold Spray Procedures for Nickel Aluminum Bronze Casting Repair
p.971

High-Temperature Tribological Properties of ReB₂-Based Ceramic/Si₃N₄ Sliding Pairs
p.978

Effects of Retained Austenite Conditions on the Ductility of the Advanced High Strength Steels
p.984

Solid State Amorphization and Alloy Parameters for High Entropy Alloys
p.990

Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution
p.997

Stress Ratio Effect on Fatigue Crack Initiation Mechanism of Magnesium Alloy AZ31
p.1003

Applications of Smart Material of Li₂O-(Nb/Ta)₂O₅-TiO₂ Solid Solution Having a Unique Periodical Structure
p.1009

Crystal Orientation Relationships among Acicular Ferrite, Oxide and the Austenite Matrix in a Steel Weld Metal
p.1014

FTMP-Based Kink Deformation and Strengthening Mechanisms for Mille-Feuille Structures
p.1019

HomeMaterials Science ForumMaterials Science Forum Vol. 1016Corrosion Resistance Evaluation of a...

Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution

Abstract:

To clarify the effect of the acid solution type on corrosion resistance, the corrosion behavior of stainless steel brazed joints in HCl aqueous solution was evaluated through electrochemical measurements. Anodic polarization curves of a ferritic stainless-steel base metal, Ni-based brazing filler metals, and a brazed joint were recorded. In addition, in situ observations were conducted to observe the corrosion behavior of each structure of the brazed joint. Corrosion potentials of the brazing filler metal were lower than that of the base metal. In situ observations of the brazed joint revealed the order of corrosion in aqueous hydrochloric acid. According to the electrochemical measurements, under an actual corrosive environment, the brazing filler metal can function as an anode and selectively corrode. In addition, the anodic polarization curve of the brazed joint showed values between those of the polarization curves of the brazing filler metal and the base metal, indicating that the corrosion resistance could be electrochemically evaluated in HCl aqueous solution.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volume 1016)

Pages:

997-1002

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.1016.997

Citation:

Cite this paper

Online since:

January 2021

Authors:

Hikaru Nagata*, Masa Ono, Yasuyuki Miyazawa, Yuji Hayashi, Yoshio Bizen

Keywords:

Anodic Polarization Curve, Brazing, Corrosion, Hydrochloric Acid, Stainless Steel

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Matsu, K., Welding Technology (in Japanese), Vol. 59 (2011), pp.54-57.

Google Scholar

[2] Iwata Masaya, Investigation into Formation Mechanism of Microstructures of Stainless Steel Brazed Joint and Estimation of the Corrosion Resistance, Tokai University, Applied Science Graduate School of Engineering, master thesis (2019).

Google Scholar

[3] Katsuno Sugawara, Guidelines for The Selection of Corrosion-Resistant Non-Ferrous Metals IV: Nickel-Based Alloy, Journal of the Society of Materials Science, Japan, Vol. 64, No. 1 (2015), pp.57-62.

DOI: 10.2472/jsms.64.57

Google Scholar

[4] Masatoshi Kato, Takashi Sakaki, Effect of Alloying Elements on Corrosion Behaviour of Cr in　HCI Solutions, J.Japan Inst.Met.Mater. Vol. 56, No .1 (1992), pp.74-80.

Google Scholar

[5] P.Villars, Alan Prince, Hiroaki Okamoto. Handbook of Ternary Alloy Phase Diagrams.

Google Scholar