Paper Titles

Production Ceramic Crude Petroleum Filters from Local Raw Materials
p.96

Synthesis Structural and Optical Properties of CMC/MgO Nanocomposites
p.104

Optimization the Machining Parameters of Electro Chemical Discharge Machining of NiTi Shape Memory Alloys
p.117

The Computational Fluid Dynamics Investigation on the Solidification of Aluminum Cast in Moulds with Different Thickness and the Influence of the Moderate Press
p.127

Incremental Forming of AA8006 Aluminum Alloys Sheet with Different Step Size
p.137

Resistance Spot Welding of Dissimilar Alloys 1008 Low Carbon Steel- 1100 Aluminum Alloy
p.144

Simulation Upper Bound Theorem to Prediction Extrusion Load
p.159

Investigation into the Distribution of Erosion-Corrosion in the Furnace Tubes of Oil Refineries
p.165

The Effect of Electrical Discharge Machining Total Heat Generated on White Layer Thickness (WLT) and Fatigue Life for Die Steel
p.182

HomeMaterials Science ForumMaterials Science Forum Vol. 1039Incremental Forming of AA8006 Aluminum Alloys...

Incremental Forming of AA8006 Aluminum Alloys Sheet with Different Step Size

Article Preview

Abstract:

The main objects of this paper are to deal with the new technology of metal sheet forming using the incremental single-point tool to form the sheet metal. However, due to the needed long time to form the metal in incremental so that we used punching and then incremental forming to geometry the final shape of the product. By measuring the thickness and longitudinal strain and evaluating the hoop strain, it was noticed that the less depth in punching with less step size in incremental forming have a better strain effect in metal sheet forming. Keywords: Single point, incremental forming, Strain analysis, step size.

You might also be interested in these eBooks

Materials Science and Modern Manufacturing

Info:

Periodical:

Materials Science Forum (Volume 1039)

Pages:

137-143

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.1039.137

Citation:

Cite this paper

Online since:

July 2021

Authors:

Ahmed M. Obaid*, Jumaa S. Chiad, Ghanim Sh. Sadiq

Keywords:

Incremental Forming, Single Point, Step Size, Strain Analysis

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2021 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] R. Kopp, A. Schmitz, Plastic working in Germany and related environmental issues, Int. J. Mater. Process. Technol. 59 (1996) 186–198.

[2] J. Banhart, J. Baumeister, Deformation characteristics of metal foams, Int. J. Mater. Sci. 33 (6) (1998) 1431–1440.

[3] S. Novotny, P. Hein, Hydroforming of sheet metal pairs from aluminum alloys, Int. J. Mater. Process. Technol. 115 (2001) 65–69.

DOI: 10.1016/s0924-0136(01)00766-x

[4] L.H. Lang, Z.R. Wang, D.C. Kang, S.J. Yuan, S.H. Zhang, J.Danckert, K.B. Nielsen, Hydroforming highlights: sheet hydroforming and tube hydroforming, Int. J. Mater. Process. Technol. 151 (2004) 165–177.

DOI: 10.1016/j.jmatprotec.2004.04.032

[5] J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, J. Allwood, Asymmetric single point incremental forming of sheet metal, Ann. CIRP 54/1 (2005).

DOI: 10.1016/s0007-8506(07)60021-3

[6] D. Leach, A.J. Green, A. Brimley, Anew incremental sheet forming process for small batch and prototype parts, in: Proceeding of Ninth International Conference on Sheet Metal, Leuven, 2001, p.211–218.

[7] D. S. Malwad and V. M. Nandedkar, Deformation mechanism analysis of single point incremental sheet metal forming,, in Proc. 3rd International Conference on Materials Processing and Characterization, Procedia Materials Science, vol. 6, pp.1505-1510, (2014).

DOI: 10.1016/j.mspro.2014.07.130

[8] M. Oraon and V. Sharma, Prediction of surface roughness in single point incremental forming of AA3003-O alloy using artificial neural network,, Int. J. Materials Engineering Innovation, vol. 9, no. 1, (2018).

DOI: 10.1504/ijmatei.2018.10013312

[9] S. Kurra, N. H. Rahman, S. P. Regalla, and A. K. Gupta, Modeling and optimization of surface roughness in single point incremental forming process,, J. Mater. Res. Tech. vol. 4, no. 3, pp.304-313, (2015).

DOI: 10.1016/j.jmrt.2015.01.003

[10] H. Amino, Y. Lu, T. Maki, S. Osawa, K. Fukuda, Dieless NC forming, prototype of automotive service parts, in: Proceeding of the Second International Conference on Rapid Prototyping and Manufacturing (ICRPM), Beijing, (2002).

[11] T.J. Kim, D.Y. Yang, Improvement of formability for the incremental sheet metal forming process, Int. J. Mech. Sci. 42 (2001) 1271–1286.

DOI: 10.1016/s0020-7403(99)00047-8

[12] G. Hirt, S. Junk, N.Witulsky, Incremental sheet forming: quality evaluation and process simulation, in: Proceeding of the Seventh ICTP Conference, Yokohama, 2002, p.925–930.

[13] A. R. I. Kheder, N. M. Jubeh, E. M. Tahah Fatigue behavior of alloyed acicular ductile iron, International Journal for the Joining of Materials, Vol. 17, No. 01, pp.7-12, (2005).

[14] Bashar A. Bedaiwi, Jumaa S. Chiad Vibration analysis and measurement in the below knee prosthetic limb part I: Experimental work, ASME 2012 International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), (2012).

DOI: 10.1115/imece2012-85811

[15] Ayad M. Takhakh, Fahad M. Kadhim, Jumaa S. Chiad Vibration analysis and measurement in KNEE ankle foot orthosis for both metal and plastic KAFO type, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), (2013).

DOI: 10.1115/imece2013-64641

[16] Jumaa S. Chiad Study the Impact Behavior of the Prosthetic Lower Limb Lamination Materials due to Low Velocity Impactor, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA, 2014, July 25–27, (2014).

DOI: 10.1115/esda2014-20007

[17] Kadhim K. Resan, Abbas A. Alasadi, Muhannad Al-Waily, Muhsin J. Jweeg Influence of Temperature on Fatigue Life for Friction Stir Welding of Aluminum Alloy Materials, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, Vol. 18, No. 02, (2018).

[18] Jumaa S. Chiad, Muhannad Al-Waily, Mohsin Abdullah Al-Shammari Buckling Investigation of Isotropic Composite Plate Reinforced by Different Types of Powders, International Journal of Mechanical Engineering and Technology (IJMET), Vol. 09, No. 09, p.305–317, (2018).

[19] Abeer R. Abbas, Kadhim A. Hebeatir, Kadhim K. Resan Effect of Laser Energy on the Structure of Ni46–Ti50–Cu4 Shape-Memory Alloy, International Journal of Nanoelectronics and Materials, Vol. 11, No. 04, pp.481-498, (2018).

DOI: 10.1088/1757-899x/1094/1/012135

[20] Noor Dhia Yaseen, Jumaa S. Chiad, Firas Mohammed Abdul Ghani The Study and Analysis of Stress Distribution Subjected on the Replacement Knee Joint Components using Photo-Elasticity and Numerical Methods, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 08, No. 06, pp.449-464, (2018).

DOI: 10.24247/ijmperddec201849

[21] Mohsin Abdullah Al-Shammari, Lutfi Y. Zedan, Akram M. Al-Shammari FE simulation of multi-stage cold forging process for metal shell of spark plug manufacturing, 1st International Scientific Conference of Engineering Sciences-3rd Scientific Conference of Engineering Science, ISCES 2018–Proceedings, (2018).

DOI: 10.1109/isces.2018.8340555

[22] Jumaa S. Chiad, Fadhel Abbas Abdulla Effect of Number and Location of Dampers on Suspension System for Washing Machine, International Journal of Mechanical Engineering and Technology (IJMET), Vol. 09, No. 08, pp.794-804, (2018).

[23] Fahad M Kadhim, Jumaa S Chiad, Ayad M Takhakh Design And Manufacturing Knee Joint for Smart Transfemoral Prosthetic, IOP Conference Series: Materials Science and Engineering, International Conference on Materials Engineering and Science, Vol. 454, (2018).

DOI: 10.1088/1757-899x/454/1/012078

[24] H. J. Abbas, M. J. Jweeg, Muhannad Al-Waily, Abbas Ali Diwan Experimental Testing and Theoretical Prediction of Fiber Optical Cable for Fault Detection and Identification, Journal of Engineering and Applied Sciences, Vol. 14, No. 02, pp.430-438, (2019).

DOI: 10.36478/jeasci.2019.430.438

[25] Esraa A. Abbod, Muhannad Al-Waily, Ziadoon M. R. Al-Hadrayi, Kadhim K. Resan, Saif M. Abbas Numerical and Experimental Analysis to Predict Life of Removable Partial Denture, IOP Conference Series: Materials Science and Engineering, 1st International Conference on Engineering and Advanced Technology, Egypt, Vol. 870, (2020).

DOI: 10.1088/1757-899x/870/1/012149

[26] Fahad M. Kadhim, Jumaa S. Chiad, Maryam Abdul Salam Enad Evaluation and Analysis of Different Types of Prosthetic Knee Joint Used by above Knee Amputee, Defect and Diffusion Forum Journal, Vol. 398 , p.34–40, (2020).

DOI: 10.4028/www.scientific.net/ddf.398.34

[27] Ehab N. Abbas, Muhsin J. Jweeg, Muhannad Al-Waily Fatigue Characterization of Laminated Composites used in Prosthetic Sockets Manufacturing, Journal of Mechanical Engineering Research and Developments, Vol. 43, No. 5, pp.384-399, (2020).

[28] Suhair Ghazi Hussein, Mohsin Abdullah Al-Shammari, Ayad M. Takhakh, Muhannad Al-Waily Effect of Heat Treatment on Mechanical and Vibration Properties for 6061 and 2024 Aluminum Alloys, Journal of Mechanical Engineering Research and Developments, Vol. 43, No. 01, pp.48-66, (2020).

[29] Ghaith G. Hameed, Muhsin J. Jweeg, Ali Hussein Springback and side wall curl of metal sheet in plain strain deep drawing, Research Journal of Applied Sciences, Vol. 04, No. 05, pp.192-201, (2009).

[30] A. R. I. Kheder, N. M. Jubeh, E. M. Tahah Fatigue properties under constant stress/variable stress amplitude and coaxing effect of acicular ductile iron and 42 CrMo4 steel, Jordan Journal of Mechanical and Industrial Engineering, Vol. 05, No. 04, (2011).

[31] Ragad Aziz Neama, Maher A.R. Sadiq Al-Baghdadi, Muhannad Al-Waily Effect of Blank Holder Force and Punch Number on the Forming Behavior of Conventional Dies, International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, Vol. 18, No. 04, (2018).

[32] Worood Hussein, Mohsin Abdullah Al-Shammari Fatigue and Fracture Behaviours of FSW and FSP Joints of AA5083-H111 Aluminium Alloy, IOP Conference Series: Materials Science and Engineering, International Conference on Materials Engineering and Science, Vol. 454, (2018).

DOI: 10.1088/1757-899x/454/1/012055

[33] Abeer R. Abbas, Kadhim A. Hebeatir, Kadhim K. Resan Effect of CO2 Laser on Some Properties of NI46TI50CU4 Shape Memory Alloy, International Journal of Mechanical and Production Engineering Research and Development, Vol. 08, No. 02, pp.451-460, (2018).

DOI: 10.24247/ijmperdapr201852

[34] Muhsin J. Jweeg, Kadhim K. Resan, Esraa A. Abbod, Muhannad Al-Waily Dissimilar Aluminium Alloys Welding by Friction Stir Processing and Reverse Rotation Friction Stir Processing, IOP Conference Series: Materials Science and Engineering, Vol. 454, International Conference on Materials Engineering and Science, Istanbul, Turkey, 8 August, (2018).

DOI: 10.1088/1757-899x/454/1/012059

[35] Jawad. K. Oleiwi, Basim A. Abass Thermal Properties of Polymeric Composites Reinforced by Nanoceramic Materials, International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, No. 6, pp.517-524, (2018).

DOI: 10.24247/ijmperddec201855

[36] Yusra Alyas Shafeeq, Jumaa S. Chiad, Yassr Y. Kahtan Study, analysis, the vibration and stability for the artificial hand during its daily working, International Journal of Mechanical Engineering and Technology, Vol. 9, No. 13, p.1706–1716, (2018).

[37] Alaa a. Mohammed, Emad S. Al-Hassani, Jawad K. Oleiwi The Nanomechanical Characterization and Tensile Test of Polymer Nanocomposites for Bioimplants, AIP Conference Proceedings, (2019).

DOI: 10.1063/1.5116992

[38] Sadiq emad Sadiq, Sadeq Hussein Bakhy, Muhsin Jaber Jweeg Effects of Spot Welding Parameters on the Shear Characteristics of Aluminum Honeycomb Core Sandwich Panels in Aircraft structure, Test Engineering and Management, Vol. 83, p.7244 – 7255, (2020).

DOI: 10.1088/1757-899x/928/2/022126

[39] Dania Fadhil Abbas, Kadhim Kamil Resan, Ayad M. Takhakh 'Microstructure, mechanical and corrosion properties of the 50%Ni-47%Ti-3%Cu shape memory alloy. 3rd International Conference on Engineering Sciences, IOP Conference Series: Materials Science and Engineering, Vol. 671, (2020).

DOI: 10.1088/1757-899x/671/1/012142

[40] Muhannad Al-Waily, Iman Q. Al Saffar, Suhair G. Hussein, Mohsin Abdullah Al-Shammari Life Enhancement of Partial Removable Denture made by Biomaterials Reinforced by Graphene Nanoplates and Hydroxyapatite with the Aid of Artificial Neural Network, Journal of Mechanical Engineering Research and Developments, Vol. 43, No. 6, pp.269-285, (2020).

[41] Fahad M. Kadhim, Ayad M. Takhakh, Jumaa S. Chiad Modeling and Evaluation of Smart Economic Transfemral Prosthetic, Defect and Diffusion Forum Journal, Vol. 398, p.48–53, (2020).

DOI: 10.4028/www.scientific.net/ddf.398.48

[42] Suhair Ghazi Hussein, Mohsin Abdullah Al-Shammari, Ayad M. Takhakh, Muhannad Al-Waily Effect of Heat Treatment on Mechanical and Vibration Properties for 6061 and 2024 Aluminum Alloys, Journal of Mechanical Engineering Research and Developments, Vol. 43, No. 01, pp.48-66, (2020).

[43] Akeel Z. Mahdi, Samir A. Amin, Sadeq H. Bakhy Influence of Refill Friction Stir Spot Welding Technique on the Mechanical Properties and Microstructure of Aluminum AA5052 and AA6061-T3, 3rd International Conference on Engineering Sciences, IOP Conference Series: Materials Science and Engineering, Vol. 671, (2020).

DOI: 10.1088/1757-899x/671/1/012156