Friction Coefficient during Five-Phased Start-Stop Tests of PEEK-PTFE Hybrid Radial Ball Bearings Reaching 50 c° under 487N at 600rpm in Air

Shota Adachi; Koshiro Mizobe; Takahiro Matsueda; Katsuyuki Kida

doi:10.4028/p-gmwen8

Paper Titles

Effect of Line Width and Wall Count on the Compressive Strength of Single and Functionally Graded Additively Manufactured ABS Gyroid Structure
p.71

Predictive Modeling of Out-of-Plane Deviation for the Quality Improvement of Additive Manufacturing
p.79

Mechatronic Design of Two-Jaw Pleating End-Effector for Large-Scale Carbon Fibre Reinforced Polymer Manufacturing
p.85

Observation of Internal Fatigue Cracks in Repeatedly Induction-Heated S45C Bearing Steel under Rotating Bending Fatigue
p.93

Friction Coefficient during Five-Phased Start-Stop Tests of PEEK-PTFE Hybrid Radial Ball Bearings Reaching 50 c° under 487N at 600rpm in Air
p.99

Potassium Hydroxide Activation as an Adsorbent for Equilibrium Isotherms of Hexavalent Chromium Adsorptions onto Garcinia mangosteen Shell
p.107

Potassium Hydroxide Activation as an Adsorbent for Kinetic Models of Hexavalent Chromium Adsorptions onto Garcinia mangosteen Shell
p.115

Industrial Electrocatalytic Oxidation - The Future of «Green Chemistry»
p.125

About Complex Oil Flow Curve Form in Anomaly Viscosity Low Temperatures and Shear Rates Conditions
p.131

HomeMaterials Science ForumMaterials Science Forum Vol. 1086Friction Coefficient during Five-Phased Start-Stop...

Friction Coefficient during Five-Phased Start-Stop Tests of PEEK-PTFE Hybrid Radial Ball Bearings Reaching 50 c° under 487N at 600rpm in Air

Abstract:

Start-stop rolling contact fatigue tests of PEEK-PTFE hybrid radial bearings were carried out, to investigate the influence of start-stop heat cycle on the friction coefficient of PEEK-PTFE hybrid radial bearings. It was found in all start-stop tests, the temperature of sample side increased as the friction coefficient increased. RCF cycles to reach 50 °C of the third start-stop phase clearly increased from the second start-stop tests, and then kept constant value.

You might also be interested in these eBooks

The 5th International Conference on Mechanical Engineering and Applied Composite Materials

View Preview

Materials Research, Chemical and Petrochemical Production

View Preview

Info:

Periodical:

Materials Science Forum (Volume 1086)

Pages:

99-103

DOI:

https://doi.org/10.4028/p-gmwen8

Citation:

Cite this paper

Online since:

April 2023

Authors:

Shota Adachi, Koshiro Mizobe, Takahiro Matsueda, Katsuyuki Kida*

Keywords:

Ball Bearings, Friction Coefficient, PEEK, PTFE, Radial Bearings, Start-Stop Test

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] M. Thiruchitrambalam, D. Bubesh Kumar, D. Shanmugam, and M. Jawaid, Materials Today: Proceedings, Vol. 33, (2020), pp.1085-1092

DOI: 10.1016/j.matpr.2020.07.124

Google Scholar

[2] Z. Lu, H. Liu, C. Zhu, H. Song and G. Yu, International Journal of Fatigue, Vol.125(2019), pp.342-348

Google Scholar

[3] Y. Takeichi, A. Wibowo, M. Kawamura and M. Uemura, WEAR, Vol. 264, (2008), pp.308-315

Google Scholar

[4] H. Koike, K. Kida, K. Mizobe, X. Shi, S. Oyama and Y. Kasima, Tribology International, Vol.90, (2015), pp.77-83.

Google Scholar

[5] K. Mizobe, T. Honda, H. Koike, E. C. SANTOS, K. Kida and Y. Kashima: Advanced Materials Research, Vol. 567, (2012), pp.66-70.

Google Scholar

[6] K. Hiraki, K. Mizobe, T. Matueda, Y. Kashima and K. Kida, Materials Science Forum, Vol. 1020, (2021), pp.114-119

Google Scholar