High Temperature Squeeze Casting of Nickel Based Metal Matrix Composites with Interpenetrating Microstructure

Abstract:

High temperature squeeze casting enables the fabrication of composite structures for alloys with high melting points, suitable for structural and tribological applications at high temperatures. Nickel-chromium alloys with chromium contents of about 20 wt% are extremely resistant to corrosion and exhibit operation temperatures up to 1000 °C due to the high solubility of chromium in nickel and its high melting point. The creep and wear resistance of the metal matrix composite material (MMC) is achieved by a stable ceramic backbone of Alumina with a bimodal pore structure. The fabrication of interpenetrating nickel-chromium/alumina MMCs, namely NiCr8020/Al₂O_3/50_pp, at temperatures above 1550 °C is shown. A special infiltration tool geometry has been used to withstand thermal and mechanical strain, necessary for the infiltration of preforms with 40 mm in height. The infiltration was performed in a unique high temperature squeeze casting device with tool temperatures of about 700 °C. Infiltration duration (pore filling) was as long as about 12 s. For this, the thermal management of the tool is the demanding part. Whereas the inner cavity has to be as hot as possible to enable infiltration and to prevent premature solidification. In contrast the outer side of the infiltration tool has to be as cold as possible to withstand the infiltration pressure applied directly to the squeeze casting tool.

• Periodical: Materials Science Forum (Volumes 825-826)
• Pages: 93-100
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.825-826.93
• Online since: July 2015
• Authors: Johannes Edelbauer*, David Schuller, Oliver Lott, Alwin Nagel
• Keywords: High Temperature Materials, Interpenetrating Composites, Metal Matrix Composite, Nickel Based Composites, Squeeze Casting

References

[1] M. Klement, A. Nagel, O. Lott, Synthesis of Copper/Silicon-Carbide Composites in a thermodynamic disequilibrium, submitted to Materials Science Forum Journal (2015).

DOI: 10.4028/www.scientific.net/msf.825-826.189

[2] H. Tietz, Technische Keramik, VDI Verlag, Düsseldorf, (1994).

[3] A. Haeger, K. G. Schell, A. Nagel, E.C. Bucharsky, R. Oberacker, M. J. Hoffmann, Fabrication and High Temperature Creep Behaviour of Interpenetrated Nickel–Chromium/Alumina Composites, Advanced Engineering Materials 14 (2012) 795-801.

DOI: 10.1002/adem.201200055

[4] A.F. Whitehouse, Creep of Metal Matrix Composites, Comprehensive Composite Materials 3 (2000) 371-418.

DOI: 10.1016/b0-08-042993-9/00014-0

[5] F. F. Lange, B. V Velamakanni, A.G. Evans, J. Am, Journal of the American Ceramic Society 73 (1990) 388-393.

[6] M. Dhanashekar, V.S. Senthil Kumar, Squeeze Casting of Aluminum Metal Matrix Composites – An Overview, Procedia Engineering 97 (2014) 412-420.

DOI: 10.1016/j.proeng.2014.12.265

[7] E.J. Vinarcik, High integrity die casting processes, Wiley, New York, (2003).

[8] Z. Brown, C. Barnes, J. Bigelow, P. Dodd, Squeeze Cast Automotive Applications and Design Considerations, La Metallurgia Italiana, Italy, (2009).

[9] H. Jang, K Ko, S.J. Kim, R.H. Basch, J.W. Fash, The effect of metal fibers on the friction performance of automotive brake friction materials, Wear 256 (2004) 406–414.

DOI: 10.1016/s0043-1648(03)00445-9

[10] K. U. Kainer, Metal Matrix Composites, Custom-made materials for automotive and aerospace engineering, Wiley-VCH, Weinheim, Germany, (2006).

DOI: 10.1080/10426910701884301

[11] A. Mortensen, I. Jin, Solidification processing of metal matrix composites, International Materials Reviews 37 (1992) 1001-128.

DOI: 10.1179/imr.1992.37.1.101

[12] N. Chawla, K.K. Chawla, Metal matrix composites, Springer, New York, (2006).

[13] S. Nagata, K. Matsuda, Effects of some Factors on the Critical Preheating Temperature of Particles in Producing Metal-Particle Composites by Pressure Casting, Journal of the Japan Foundrymen Society 53 (1981) 35-43.

[14] Almatis, Reactive and Calcined Aluminas for the Ceramic Industry, (2005).

[15] Isabellenhütte, ISA®-CHROM 80 data sheet, (2015).

[16] B. Huchler, Pressure Infiltration Behaviour and Properties of Aluminum Alloy - Oxide Ceramic Preform Composites, Dissertation, University of Birmingham, Birmingham, England, (2009).

[17] O. Lott, Interface Design of Copper/Alumina Composites with Interpenetrating Phase Structure, Dissertation, School of Materials Science and Engineering University of New South Wales, Sydney, Australia, (2012).