Machinability of an Experimental Graphitised Carbon Steel

Abstract:

The machinability of an experimental medium-carbon steel with a composition designed to promote rapid graphitisation during a high temperature anneal has been studied. The goal has been to explore alternative routes to a competitive free-cutting composition enabling less expensive steelmaking, manufacturing and recycling. Three starting microstructures prior to annealing have been considered; martensite, bainite and ferrite/pearlite. The microstructures and graphite dispersions formed have been characterised by optical and electron microscopy and the performance of the steel during machining compared with commercial free-cutting steel grades. A bench-top drill rig and metallographic techniques were used to evaluate relative machinability parameters, including surface roughness, tool wear and chip morphology. Thus it proved possible to rank the experimental steel graphitised from the three starting microstructural conditions and also against the commercial free-cutting steels.

• Periodical: Materials Science Forum (Volume 879)
• Pages: 477-482
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.879.477
• Online since: November 2016
• Authors: Aqil Inam, David Edmonds*
• Keywords: Bainite, Ferrite/Pearlite, Free-Machining Steel, Graphitisation, Martensite

References

[1] S.R. Lampman, T.B. Zorc, Properties and Selection: Irons, Steels and High Performance Alloys, Metals Handbook, ASM International, Materials Park, OH, (1990).

DOI: 10.31399/asm.hb.v01.9781627081610

[2] T. Iwamoto et al., An Advanced High Strength Graphitised Steel for Machining and Cold Forging Uses, in: C.J. Van Tyne, G. Krauss, D.K. Matlock (Eds. ), Fundamentals and Applications of Microalloying Forging Steels, TMS/Minerals, Metals and Materials Society, Warrendale, PA, 1996, pp.277-86.

[3] E.M. Trent, P.K. Wright, Metal Cutting, fourth ed., Butterworth-Heinemann, Boston, (2000).

[4] T.H.C. Childs et al., Metal machining: Theory and Applications, Arnold, London, (2000).

[5] T. Akasawa et al., Effects of Free-cutting Additives on the Machinability of Austenitic Stainless Steels, J. Mater. Proc. Technol. 143-144 (2003) 66-71.

DOI: 10.1016/s0924-0136(03)00321-2

[6] S. Katayama, M. Toda, Machinability of Medium Carbon Graphitic Steel, J. Mater. Proc. Technol. 62 (1996) 358-62.

DOI: 10.1016/s0924-0136(96)02435-1

[7] T. Iwamoto, T. Murakami, Bar and Wire Steels for Gears and Valves of Automobiles – Eco-friendly Free-cutting Steel without Lead Addition, JFE Technical Report, JFE, 2004, pp.64-9.

[8] K. He, D.V. Edmonds, On the Formation of Graphite Nodules in the Solid-State, in: R. Cross, M. Witcomb (Eds. ), Proceedings 15th International Congress on Electron Microscopy, Durban, 2002, Vol. 1, Physical, Materials and Earth Sciences, Microscopy Society of Southern Africa, 2002, pp.719-20.

[9] K. He and D.V. Edmonds, A High-resolution Electron Microscope Study of the Growth Structure of Graphite Nodules in Steel, in: R. Cross, M. Witcomb (Eds. ), Proceedings 15th International Congress on Electron Microscopy, Durban, 2002, Vol. 1, Physical, Materials and Earth Sciences, Microscopy Society of Southern Africa, 2002, pp.667-8.

[10] M.J.W. Green et al., Graphitisation of Medium-Carbon Steel, in: Proceedings International Conference on Materials Science and Technology, 2004, Vol. 1, Precipitation in Steels – Physical Metallurgy and Property Development, AIST/The Minerals, Metals and Materials Society, Warrendale, PA, 2004, pp.207-15.

[11] K. He et al., An EFTEM Study of the Dissolution of Cementite during the Graphitisation Annealing of a Quenched Medium Carbon Steel, in: Proceedings Electron Microscopy and Analysis Group Conference, Leeds, 2005, Imaging, Analysis and Fabrication on the Nanoscale, J Physics: Conference Series 26, IOP Publishing, Bristol, 2006, p.111.

DOI: 10.1088/1742-6596/26/1/026

[12] K. He et al., Analytical Electron Microscope Study of the Dissolution of the Fe3C Iron Carbide Phase (Cementite) During a Graphitisation Anneal of Carbon Steel, J. Mater, Sci. 41 (2006) 5235-41.

DOI: 10.1007/s10853-006-0588-4

[13] K. He et al., An Electron Microscopic Study of Spheroidal Graphite Nodules Formed in a Medium-carbon Steel by Annealing, Acta Materialia, 55 (2007) 2919-27.

DOI: 10.1016/j.actamat.2006.12.029

[14] K. Banerjee, T. Venugopalan, Development of Hypoeutectoid Graphitic Steel for Wires, Mater. Sci. Technol. 24 (2008) 1174 – 8.

DOI: 10.1179/174328408x326084

[15] A. Inam, D.V. Edmonds, R. Brydson, Heterogeneous Nucleation of Graphite in Carbon Steel, in: D.J. Stokes, W.M. Rainforth (Eds. ), Proceedings 15th European Microscopy Congress, Manchester, 2012, Royal Microscopical Society, Oxford, 2012, pp.495-6.

[16] A Inam, DV Edmonds, R. Brydson, Effect of Starting Microstructure upon the Nucleation Sites and Distribution of Graphite Particles During a Graphitising Anneal of an Experimental Medium-carbon Machining Steel, Mater. Char. 106 (2015) 86-9.

DOI: 10.1016/j.matchar.2015.05.014

[17] A. Inam, Machinability of Graphitised Carbon Steel, Ph.D. thesis, University of Leeds, UK, (2013).