Incorporation of Zirconia and Silica Nanoparticles into PEO-Coatings on Magnesium Alloys

Article Preview

Abstract:

The effect of dispersity and zeta-potential of the nanoscale materials (ZrO2 and SiO2) used as an electrolyte component for plasma electrolytic oxidation on the composition and properties of the coatings was investigated. In was established the improvement of the protective properties for coatings with the incorporated nanoparticles has been explained by the greater thickness of the protective layer, relatively low porosity and presence of narrow non-through pores. The layer with zirconia has a impedance modulus measured at low frequency (|Z|f=0.01 Hz = 5.9·105 Ω·cm2) on one order higher than the PEO-coating formed in the electrolyte without nanoparticles (|Z|f=0.01 Hz = 8.0104 Ω·cm2).

You might also be interested in these eBooks

Info:

Periodical:

Solid State Phenomena (Volume 213)

Pages:

125-130

Citation:

Online since:

March 2014

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2014 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] S.V. Gnedenkov, O.A. Khrisanfova, A.G. Zavidnaya, S.L. Sinebryukhov, V.S. Egorkin, M.V. Nistratova, A. Yerokhin, A. Matthews, PEO coatings obtained on an Mg-Mn type alloy under unipolar and bipolar modes in silicate-containing electrolytes, Surf. Coat. Technol. 14-15 (2010).

DOI: 10.1016/j.surfcoat.2009.12.024

Google Scholar

[2] A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, S.J. Dowey, Plasma electrolysis for surface engineering, Surf. Coat. Technol. 122 (1999) 73-93.

DOI: 10.1016/s0257-8972(99)00441-7

Google Scholar

[3] R. Arrabal, E. Matykina, F. Viejo, P. Skeldon, G.E. Thompson, Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings, Corros. Sci. 50 (2008) 1744-1752.

DOI: 10.1016/j.corsci.2008.03.002

Google Scholar

[4] S.V. Gnedenkov, S.L. Sinebryukhov, D.V. Mashtalyar, V.S. Egorkin, A.K. Tsvetnikov, A.N. Minaev, Charge Transfer at the Antiscale Composite Layer-Electrolyte Interface, Prot. Met. 43 (2007) 667-673.

DOI: 10.1134/s0033173207070090

Google Scholar

[5] E. Matykina, R. Arrabal, F. Monfort, Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions, Appl. Surf. Sci. 255 (2008) 2830–2839.

DOI: 10.1016/j.apsusc.2008.08.036

Google Scholar

[6] A.N. Minaev, S.V. Gnedenkov, S.L. Sinebryukhov, D.V. Mashtalyar, M.V. Sidorova, Y.A. Tsvetkov, A.V. Samokhin, Composite Coatings Formed by Plasma Electrolytic Oxidation, Prot. Met. 47 (2011).

DOI: 10.1134/s2070205111070112

Google Scholar

[7] S.V. Gnedenkov, S. L Sinebryukhov, Composite polymer containing coatings on the surface of metals and alloy, Compos. Interfaces. 16 (2009) 387–405.

DOI: 10.1163/156855409x447165

Google Scholar

[8] N.V. Alekseev, A.V. Samokhin, Yu.V. Tsvetkov, RF Patent No. 2311225, Byull. Izobret., 2006, No. 33.

Google Scholar

[9] S.L. Sinebryukhov, A.S. Gnedenkov, D.V. Mashtalyar, S.V. Gnedenkov, PEO-coating/substrate interface investigation by localised electrochemical impedance spectroscopy, Surf. Coat. Technol. 6 (2010) 1697–1701.

DOI: 10.1016/j.surfcoat.2010.05.048

Google Scholar