Coatings and Lubricant to Forming Surfaces of Molds for Casting under Pressure

Abstract:

The article considers the main points for choosing lubricants, taking into account the specifics of the injection molding process. The main drawbacks of modern lubricant compositions are identified, and based on them, the main requirements for lubricants for injection molding are determined. The most critical parameters of lubricants are specified, depending on the melt to be filled. The methods of applying lubricants are considered, and the most optimal ones are selected.

• Periodical: Solid State Phenomena (Volume 316)
• Pages: 789-793
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.316.789
• Online since: April 2021
• Authors: Renat V. Gavariev*, Elena N. Soldatkina, Ksenia N. Gavarieva
• Keywords: Coating, Injection Molding, Lubrication, Mold

References

[1] Sanz A. New coatings for continuous casting rolls // Surface and Coatings Technology. (2004) vol. 177-178. pp.1-11. https://doi.org/10.1016/j.surfcoat.2003.06.024.

DOI: 10.1016/j.surfcoat.2003.06.024

[2] Pivovarchic A.A. Erozionnaya stojkost razdelitelnyh pokrytij pri litye pod davleniem al-splavov / Litejnoe proizvodstvo, (2017) vol. 1, pp.23-26.

[3] Gavariev R.V., Savin I.A., Improvement of surface quality of casting produced by casting under pressure // Solid State Phenomena (2017) vol.265, pp.988-993.

DOI: 10.4028/www.scientific.net/ssp.265.988

[4] Pankratov D.L., Gavariev R.V., Improving the quality of castings made of non-ferrous metal alloys when casting in metal molds //  IOP Conf. Series: Materials Science and Engineering 570 (2019) 012072.

DOI: 10.1088/1757-899x/570/1/012072

[5] Gavariev R.V., Savin, I.A., Research of the Mechanism of Destruction of Compression Molds for Casting under Pressure of Color Alloys // Solid State Phenomena (2018) Vol. 284, pp.326-331.

DOI: 10.4028/www.scientific.net/ssp.284.326

[6] Pankratov D.L., Gavariev R.V., Gavarieva, K.N., Influence of multilayer coatings on the operational stability of molds for injection molding // IOP Conference Series: Materials Science and Engineering (2016) Volume 134, Issue 1, 8 July 2016, Article number 012031.

DOI: 10.1088/1757-899x/134/1/012031

[7] Gavariev R.V., Savin I.A., Soldatkina E.N., Choice of Protective Coating of Metal Molds for Casting Non-Ferrous Alloys // Solid State Phenomena (2020) Vol. 299, pp.867-871.

DOI: 10.4028/www.scientific.net/ssp.299.867

[8] Gavariev R.V., Savin I.A., Leushin I. O., Improvement of zinc castings surface quality by laminated protective coating // Tsvetnye Metally (2017) No. 5, pp.84-88.

DOI: 10.17580/tsm.2017.05.13

[9] Gavariev R.V., Savin I.A., Leushin I.O., Impact of the functional coating on service durability of injection molds for the zinc alloys pressure casting // Tsvetnye Metally (2016)  No. 1, pp.66-70.

DOI: 10.17580/tsm.2016.01.11

[10] Kapranos, P., Brabazon, D., Midson, S.P., Naher, S., Haga, T. Advanced casting methodologies: inert environment vacuum casting and solidification, die casting, compocasting, and roll casting, casting, semi-solid forming and hot metal forming, (2014) Comprehensive Materials Processing, vol. 5, Elsevier Ltd., pp.3-37.

DOI: 10.1016/b978-0-08-096532-1.00503-3

[11] Balabanov, I.P., Simonova, L.A., Balabanova, O.N., Systematization of accuracy indices variance when modelling the forming external cylindrical turning process. IOP Conference Series: Materials Science and Engineering, 86 (1), (2015).

DOI: 10.1088/1757-899x/86/1/012010

[12] Gavarieva K.N., Simonova L.A., Pankratov D.L., Gavariev R.V., Development of expert systems for modeling of technological process of pressure casting on the basis of artificial intelligence // IOP Conf. Series: Materials Science and Engineering 240 (2017).

DOI: 10.1088/1757-899x/240/1/012019

[13] Safronov, N.N., L.B. Mingaleeva, and I.A. Savin.. Optimization of charge material composition in shs process with ferrosilide fabrication from gaseous wastes of metallurgical production. (2018) Chernye Metally, (2) pp.53-59.

[14] Jayal, A.D., Badurdeen, F., Dillon Jr., O.W., Jawahir, I.S. Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels  (2010) CIRP Journal of Manufacturing Science and Technology, 2 (3), pp.144-152. Cited 205 times.

DOI: 10.1016/j.cirpj.2010.03.006

[15] A.V. Shaparev and I.A. Savin, Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding. Solid State Phenomena, Vol. 284, pp.319-325, (2018).

DOI: 10.4028/www.scientific.net/ssp.284.319

[16] Gavarieva K.N., Simonova L.A., Pankratov D.L., Shibakov V.G., Gavariev R.V., Application of multi-agent system for control of parameters of precision stamping process of bevel gears // IOP Conference Series: Materials Science and Engineering, Volume 412 (2018).

DOI: 10.1088/1757-899x/412/1/012020

[17] Balabanov, I.P., Gilman, V.N., Timofeeva, T.S., Faskhutdinov, A.I., Modeling of the cutting edge rounding influence on the tool life in processing a gear wheel by the Power Skiving method. International Journal of Engineering and Technology(UAE) 7(4), 2018, pp.71-73.

DOI: 10.14419/ijet.v7i4.7.20386

[18] Gilman, V. N., I. P. Balabanov, and A. I. Faskhutdinov. Improving the Efficiency of Shaving through the use of Wear-Resistant Coatings, vol. 570, 2019. SCOPUS, www.scopus.com.

DOI: 10.1088/1757-899x/570/1/012024

[19] A.V. Shaparev, I.A. Savin, Calculation of Joint Plastic Deformation to Form Metal Compound in Cold Condition, Solid State Phenomena, 265 (2017) 313-318.

DOI: 10.4028/www.scientific.net/ssp.265.313

[20] Gavariev R.V., Savin I.A., Leushin I.O., To the question of casting alloys of non-ferrous metals in the metal mold // Materials Science Forum (2019) Vol. 946, pp.631-635.

DOI: 10.4028/www.scientific.net/msf.946.631