Synthesis and Characterization of Novel Nickel Coated Carbon Fibre Rod Reinforced Aluminium Metal Matrix Composite Material for using in Automobile Application

Abstract:

A carbon fibre (CF) in the form of a rod (continuous fibre) was used as reinforcement due to its superior strength and modulus properties. Carbon fibre rod reinforced aluminium 6061 alloy metal matrix composite material was synthesized using the stir casting liquid metallurgy route. Aluminium based metal matrix composite materials are light in weight. Very few researchers were worked on carbon fibre rod reinforced metal matrix composites (MMC). Electroless nickel deposition on carbon fibre rods (2mm and 3mm diameter) were carried out for improvement in wettability. On carbon fibre rods, the effectiveness of electroless nickel coating was validated using SEM (scanning electron microscopy) and EDAX (Energy Dispersive X-Ray Spectroscopy) analysis. A further coating thickness of nickel was improved using nickel electroplating. In a cast iron mould, nickel-coated carbon fibre rods were arranged in a circular pattern. Completely degassed molten aluminium 6061 alloy was poured in cast iron mould at 600-700 °C. The enhancement in Tribological and mechanical properties is always a prerequisite for technological advancement in automobile sector. From synthesized composites (11.11% Vol. CF and 25% Vol. CF reinforcement) specimen were prepared for density tests, bulk and microhardness tests, friction and wear tests. Synthesized composite has low density, increased bulk and microhardness, low coefficient of friction and reduced wear rate in comparison with aluminium 6061 alloy. Keywords: Carbon Fibre (CF) rod, MMC, Nickel coating, Casting, Mechanical, Tribological

• Periodical: Advanced Engineering Forum (Volume 46)
• Pages: 1-14
• DOI: https://doi.org/10.4028/p-ik37iv
• Online since: June 2022
• Authors: Rahul D. Sandhanshiv*, Dilip M. Patel
• Keywords: Carbon Fibre (CF) Rod, Casting, Mechanical, MMC, Nickel Coating, Tribological

References

[1] A. Baker, Carbon fibre reinforced metals - a review of the current technology,, Mater. Sci. Eng., vol. 17, no. 2, (1975) 177–208.

[2] S. Chand, Carbon fibers for composites,, J. Mater. Sci., vol. 35, no. 6, (2000) 1303–1313.

[3] S. J. Park and M. K. Seo, Carbon Fibres, , Springer Series in Material Science, 2nd Edition, vol. 210 (2018).

[4] K. M. Sree Manu, L. Ajay Raag, T. P. D. Rajan, B. C. Pai, V. Petley, and S. N. Verma, Self-lubricating bidirectional carbon fiber reinforced smart aluminum composites by squeeze infiltration process,, J. Mater. Sci. Technol. (2019).

DOI: 10.1016/j.jmst.2019.04.034

[5] R. D. Sandhanshiv and D. M. Patel, Carbon Fibre Reinforced Composite Material: Review of Properties and Processing for various Metal Matrix Materials,, IOP Conf. Ser. Mater. Sci. Eng., vol. 810, no. 1 (2020).

DOI: 10.1088/1757-899x/810/1/012014

[6] P. Sharma, D. Khanduja, and S. Sharma, Tribological and mechanical behavior of particulate aluminum matrix composites,, J. Reinf. Plast. Compos., vol. 33, no. 23 (2014) 2192–2202.

DOI: 10.1177/0731684414556012

[7] S. Ramesh, H. Adarsha, S. Pramod, and Z. Khan, Tribological characteristics of innovative Al6061-carbon fiber rod metal matrix composites,, Mater. Des., vol. 50 (2013) 597–605.

DOI: 10.1016/j.matdes.2013.03.031

[8] S. Prakash and N. D. Raja, Investigation of tribological behavior and the mechanical properties of TiB2, Al2O3 reinforced AA6061 matrix sintered hybrid composites,, Iran. J. Mater. Sci. Eng., vol. 18, no. 4 (2021) 1–13.

[9] B. Bhav Singh and M. Balasubramanian, Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites,, J. Mater. Process. Technol., vol. 209, no. 4 (2009) 2104–2110.

DOI: 10.1016/j.jmatprotec.2008.05.002

[10] Y. Tang, L. Liu, W. Li, B. Shen, and W. Hu, Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings,, Appl. Surf. Sci., vol. 255, no. 8 (2009) 4393–4400.

DOI: 10.1016/j.apsusc.2008.10.124

[11] Alten, E. Erzi, Ö. Gürsoy, G. Hapçı Ağaoğlu, D. Dispinar, and G. Orhan, Production and mechanical characterization of Ni-coated carbon fibers reinforced Al-6063 alloy matrix composites,, J. Alloys Compd., (2019) 543–550.

DOI: 10.1016/j.jallcom.2019.02.043

[12] H. Naji, S. M. Zebarjad, and S. A. Sajjadi, The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites,, Mater. Sci. Eng. A, vol. 486, no. 1–2 (2008) 413–420.

DOI: 10.1016/j.msea.2007.09.030

[13] K. H. Jung, S. Nam, S. S. Kang, B. C. Ku, Y. H. Bang, and J. Y. Hwang, Tribological properties of carbon fiber-reinforced aluminum composites processed by spark plasma sintering,, Carbon Lett., vol. 21, no. 1 (2017) 103–106.

DOI: 10.5714/cl.2017.21.103

[14] S. Ramesh and T. B. Prasad, Friction and wear behavior of graphite-carbon short fiber reinforced Al-17%Si alloy hybrid composites,, J. Tribol., vol. 131, no. 1 (2009) 1–5.

DOI: 10.1115/1.2991124

[15] B. Chandra Kandpal, J. Kumar, and H. Singh, Manufacturing and technological challenges in Stir casting of metal matrix composites- A Review,, Mater. Today Proc., vol. 5, no. 1 (2018) 5–10.

DOI: 10.1016/j.matpr.2017.11.046

[16] S. Rangrej, V. Mehta, V. Ayar, and M. Sutaria, Effects of stir casting process parameters on dispersion of reinforcement particles during preparation of metal composites,, Mater. Today Proc., vol. 43 (2020) 471–475.

DOI: 10.1016/j.matpr.2020.11.1002

[17] Ramanathan, P. K. Krishnan, and R. Muraliraja, A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities,, J. Manuf. Process., vol. 42, no. April (2019) 213–245.

DOI: 10.1016/j.jmapro.2019.04.017

[18] K. Shirvanimoghaddam et al., Carbon fiber reinforced metal matrix composites: Fabrication processes and properties,, Compos. Part A Appl. Sci. Manuf., vol. 92 (2017) 70–96.

[19] M. Deshpande, R. Waikar, R. Gondil, and S. V. S. Narayanmurty, Effect of coating parameters on coating rate of carbon fibers by electroless nickel plating,, Mater. Sci. Forum, vol. 830–831, no. December (2015) 635–638.

DOI: 10.4028/www.scientific.net/msf.830-831.635

[20] V. Genova, D. Marini, M. Valente, F. Marra, and G. Pulci, Nanostructured nickel film deposition on carbon fibers for improving reinforcement-matrix interface in metal matrix composites,, Chem. Eng. Trans., vol. 60 (2017) 73–78.

[21] R. . Hajjari, E.; Divandari, M.; Mirhabibi, The Study of Electroless Coating of Nickel on Carbon Fibers,, Iran. J. Mater. Sci. Eng., vol. 1 (2004) p.43–48.

[22] S. Bard, F. Schönl, M. Demleitner, and V. Altstädt, Copper and nickel coating of carbon fiber for thermally and electrically conductive fiber reinforced composites,, Polymers (Basel)., vol. 11, no. 5, (2019).

DOI: 10.3390/polym11050823

[23] C. S. Ramesh, R. Keshavamurthy, B. H. Channabasappa, and A. Ahmed, Microstructure and mechanical properties of Ni-P coated Si3N4 reinforced Al6061 composites,, Mater. Sci. Eng. A, vol. 502, no. 1–2 (2009) 99–106.

DOI: 10.1016/j.msea.2008.10.012

[24] Y. Xue, W. Chen, Q. Zhao, and Y. Q. Fu, Electroless carbon fibers: A new route for improving mechanical property and wettability of composites,, Surf. Coatings Technol., vol. 358 (2019) 409–415.

DOI: 10.1016/j.surfcoat.2018.11.072

[25] M. Sánchez, J. Rams, and A. Ureña, Fabrication of aluminium composites reinforced with carbon fibres by a centrifugal infiltration process,, Compos. Part A Appl. Sci. Manuf., vol. 41, no. 11 (2010) 1605–1611.

DOI: 10.1016/j.compositesa.2010.07.014

[26] R.D. Sandhanshiv and D.M. Patel, Design and fabrication of an adjustable stirring and degassing system for synthesis of metal matrix composite material, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2022.02.140.

DOI: 10.1016/j.matpr.2022.02.140