Static Loading Test and Evaluation of Single Beam of Highway Prestressed Concrete Hollow Slab Beam Bridge

Tai Li Chen; He Li; Zhi Hao Wang; Xiao Ke Li

doi:10.4028/www.scientific.net/AMM.587-589.1718

Paper Titles

Simulation Analysis on Construction of Liangjiang Great Bridge
p.1698

The Designing and Construction about the below Model without Wind Bracing Tied-Arch Bridge
p.1703

Research on CWR Design on Steel-Concrete Composite Beam Bridge in Alpine Region
p.1708

The Construction Technology of T-Type Rigid Frame Bridge No.0 Pouring Section
p.1713

Static Loading Test and Evaluation of Single Beam of Highway Prestressed Concrete Hollow Slab Beam Bridge
p.1718

The Technical and Economic Comparison of Reinforcing Schemes of Stone Arch Bridge
p.1723

A New Decision Support Methodology for Subway Operation Management
p.1729

Analysis and Calculation on the Capacity of Stairway in Urban Rail Transit Hubs
p.1733

Determination of the Minimum Departure Interval between Trains with same High-Speed at the Relatively Initial Station
p.1737

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 587-589Static Loading Test and Evaluation of Single Beam...

Static Loading Test and Evaluation of Single Beam of Highway Prestressed Concrete Hollow Slab Beam Bridge

Abstract:

Since the main beams of a prestressed concrete hollow slab beam Highway Bridge stored for too long, in order to assess its bearing capacity, static loading test and bearing capacity evaluation of single beam was conducted. The hollow slab beam at the locations where the transverse distribution coefficient is biggest was chose for testing, and the transverse distribution coefficient at midspans of the slab beam was calculated by the hinged slab method. By comparing the theoretical and measured values of displacement and stain at key points of the beam, structural performance of the beam was finally evaluated. The test results showed that both the strength and stiffness of the beam was conforming to the requirements of the specification and able to satisfy normal use requirements in serviceability limit state.

You might also be interested in these eBooks

Sustainable Cities Development and Environment Protection IV

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 587-589)

Pages:

1718-1722

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.587-589.1718

Citation:

Cite this paper

Online since:

July 2014

Authors:

Tai Li Chen*, He Li, Zhi Hao Wang, Xiao Ke Li

Keywords:

Bearing Capacity Evaluation, Displacement, Hollow Slab Beam, Static Loading Test, Strain

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] D.C. Huang. Static load examination and quality evaluation on 20m prestressed concrete hollow plate beam. Fujian Architecture & Construction, 9(2007), 41-42. (in Chinese).

Google Scholar

[2] B. Zhang, T.Z. Xu, F.M. Wang, et al. Experiment and study on bearing capacity of actual prestressed concrete hollow slab beam bridge. Highway, 6(2008), 1-5. (in Chinese).

Google Scholar

[3] X. K Li, Z.H. Wang, Z.L. Yang, S.B. Zhao. Nondestructive testing and static/dynamic loading detection of a diseased fabricated hollow slab bridge. Applied Mechanics and Materials, 351(2013), 1163-1167.

DOI: 10.4028/www.scientific.net/amm.351-352.1163

Google Scholar

[4] S. H He, R.W. Xie. Calculation methods for load transverse distribution on Highway Bridge. Beijing: China Communication Press, 1996. (in Chinese).

Google Scholar