Applied Mechanics and Materials Vols. 716-717

Abstract: With the development of Internet technology, the application of automotive electronic identification is more and more wide. Under net environment and bicycle vehicle conditions, this paper mainly analyzes the forming mechanism of blind spot on the blind area due to the electromagnetic wave multi-path rays, calculate formation mechanism of blind area within range of passive automotive electronic identity, and calculate results and compare actual reading test results, by comparing further prove the validity of the analysis.

Abstract: In the process of fault signal detection of large-scale integrated circuit, the fault signal detection can improve the working performance of large-scale integrated circuit. The traditional detection system is simple, time-consuming, and the error is large, the fault signal detection haslow accuracy. In view of this situation, a new design method of large scale integrated circuit fault signal detection system is proposed based on single chip microcomputer. S3C2410 is taken as hardware design basis, and the signal sensor is used, the software algorithm uses three B spline wavelet transform for ORB wave detection method. The detection is completed.The experiment experimental results show that the system can improve the detection accuracy greatly, and effectively improve the work efficiency.

Abstract: In the paper, interference measurement method for end surface parallel measurement of transparent materials is described. Firstly, basic principles of optical plane template equilibrium point detection are analyzed, measurement algorithms and formulas for calculating optical parallelism are proposed, then possible error of algorithm is analyzed in details, concrete plan for correcting the error is proposed, overall method for testing parallelism is proposed on the basis, and finally related experiment is designed for testing and analyzing the method. Test results show that the method can prominently improve precision of testing parallelism with excellent testing effect.

Abstract: Infrared scene simulation has extensive application value in military and civil fields. According to the specific experiment environment, this paper simulation of an infrared scene and according to the experimental data produced infrared texture library. First of all, through the 3Dmax modeling software to establish the target infrared radiation model, and calculate the relevant radiation data of it. Then analyze the radiation characteristics of the relevant materials, the establishment of infrared texture library for each material. And finally, use OGRE engine image rendering technology and GPU programmable pipeline technique to simulate a complex infrared scene close to the real.

Abstract: Detection speed of traditional face detection method based on AdaBoost algorithm is slow since AdaBoost asks a large number of features. Therefore, to address this shortcoming, we proposed a fast face detection method based on AdaBoost and canny operators in this paper. Firstly, we use canny operators to detect edge of face image which separates the region of the possible human face from image, and then do face detection in the separated region using Modest AdaBoost algorithm (MAB). Before using MAB to achieve face detection, utilizing canny operators to detect edge can make this algorithm effectively filter information, retain useful information, reduce the amount of information and improve detection speed. Experimental results show that the algorithm can obtain higher detection accuracy and detection speed has been significantly improved at the same time.

Abstract: After experimental verification, in terms of low-speed bearing fault diagnosis, the acoustic emission method is superior to the traditional vibration method. In order to further the study of the correlation between AE signals and the bearing state, this article refers to the bearing condition monitoring system, and gives detailed parts models, the acoustic emission acquisition system, which provides help for further researches.

Abstract: Aiming at the radar vertical detection coverage limitation given by manufacturing factories, this paper put forwards a new characterization method of radar’s air surveillance coverage: it is the projection distance of furthest detection point for different RCS targets at different altitudes, which can directly show radar’s quick response to the attack action launched by fighter. Then this paper gives the calculating method of coverage characterization method, and calculates radar detection coverage of typical medium-low altitude search. The result shows that the detection ability to penetration fighter is weak for high altitude and below 300m altitude, especially for the high altitude penetration stealth fighter.

Abstract: Rotation machine plays an important role in the production of electric power, chemical industry etc... In the methods of fault diagnosis, the selection of the Pc and Pm of common genetic algorithm will influence its convergence and is easy to be trapped into the local optimum to propose an adaptive genetic algorithm of the fault diagnosis; and in the implementation of system function, it takes the S3C2410 chip as the core of the microprocessor and uses the embedded Linux as the operating system as the software development platform. In this paper ,it introduces the design of the various parts of the system hardware in details, achieves the Boot Loader through combination of the hardware platform and successfully transplants the Linux operating system and builds a root file system, with the combination of the Linux operating system platform, it achieves the LCD frame buffer display device frame buffer, touchscreen A/D converter and development of Ethernet driver program, and the develops the data acquisition, wavelet packet analysis and Ethernet driver program etc. based on the system functions.

Abstract: The mesoscale convective system (MCS) has a great influence on the Aviation flight, this article used infrared satellite cloud image data detected by FY2D and eigenvalue method to research MCS’ identification to accurately identify the MCS cloud. Firstly, satellite image binarization processing and edge detection ,to extract the large boundary gray gradient cloud. Then, calculating cloud’s geometric center coordinates , cloud size ,centroid coordinates, the average TBB values, ellipticity and some other eigenvalue and eigenvector. Finally, selecting those which meet to the MCS identification criterion to realize the automatic identification of MCS.

Abstract: In this paper, non-destructive testing on the inner wall surface of the deep, invented a detection device, the device by numerical control systems, mechanical control devices and imaging device components. PC lower machine controlled by CNC system mechanical devices IPC and PLC can control the composition includes a manual lift the car up and down movement, control multistage axial movement of the cylinder and the axial rotation of the servo motor control to meet the imaging device the location requirements. Imaging device consists of a high-speed industrial cameras and miniature camera components. The device has a low cost, high accuracy, simple manufacturing process and so on.