Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique

Wim Nhuapeng; Supreyak Kumfu; Wandee Thamjaree; Tawee Tunkasiri

doi:10.4028/www.scientific.net/AMR.55-57.457

Paper Titles

Photo-Induced Superhydrophilic TiO₂ Films Deposited by DC Reactive Magnetron Sputtering at Room Temperature
p.441

Temperature Dependence of Optical Constants of Silver Film Studied by In Situ Spectroscopic Ellipsometry
p.445

Investigation of Aluminium Diffusion into an Amorphous Silicon Thin Film at High Temperature by In Situ Spectroscopic Ellipsometry
p.449

Self-Cleaning Properties of TiO₂ Films Deposited by Reactive Magnetron Sputtering Using Smooth D.C. and Pulsed D.C. Source
p.453

Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique
p.457

Fabrication of Ferroelectric Bismuth Titanate Glass-Ceramic by Incorporation Method
p.461

The Influence of Total and Oxygen Partial Pressures on Structure and Hydrophilic Property of TiO₂Thin Films Deposited by Reactive DC Magnetron Sputtering
p.465

Characterization of Anatase and Rutile TiO₂Thin Films Deposited by Two Cathodes Sputtering System
p.469

Ferroelectric Glass-Ceramics from the PbO-Bi₂O₃-GeO₂ System
p.473

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 55-57Fabrication of Double Layers of Aramid...

Fabrication of Double Layers of Aramid Fiber/Alumina/Epoxy Resin Laminate Composite Using Low-Pressure Technique

Abstract:

An experimental investigation was carried out to study the fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composites using low-pressure technique. To obtain the sample with high wear resistance property, the micron size of alumina particles were added into epoxy resin using the ultrasonic processor. The physical and mechanical properties such as density, hardness, impact test, wear resistance and tensile strength of the composites samples were investigated. Furthermore, microstructures of specimens were also examined by scanning electron microscope (SEM). From the results, it was found that the mechanical properties of double layers laminate composites of aramid fiber/alumina/epoxy resin could improve by using the low-pressure technique.