Advanced Materials Research Vols. 816-817

Abstract: This paper studies the treatment of Neumann boundary conditions when solving Poisson equation using meshless Galerkin method. We find that Neumann boundary conditions can be implemented more accurately by adopting proper method. Advantages of doing this are also shown.

Abstract: To save the experiments cost of verifying the synchronous control systems performance, a set of synthesis loop experiment simulation system is designed in this paper. Firstly, on the basis of analysis the working principle of the synthesis loop, the components used for the various parts of the synthesis loop simulation system are designed. Secondly, according to the characteristics of the two experimental loop, Will experiment, High-Closing experiment, circuit diagrams are designed respectively, software is debugged, and finally get the simulation system which meet the requirements.

Abstract: In order to measuring the capability of atmosphere of ventilating fans and range hood, this article offered a measuring system for the capability of wind pressure and air volumes for ventilating fans and range hoods. The measuring method is determining the pressure difference on the two sides of a series of orifices, and then figuring out wind pressure and air volumes to determine the aerodynamics characters. By minicomputer and surveying sensors of the pressure, there are three parameters that must be tested called compressive stress, temperature and power. The data will be input into pc after it is converted by RS-485/RS-232 converter. The system designs an interface with visual programming tool Visual Basic to realize the function of data storage and data display.

Abstract: This paper introduces an industrial pump CAPP system which is based on feature modeling development and object-oriented technology. Establishing product expression of the characteristics at different levels; discussing the implementation of an object-oriented mechanism, expression of characteristics and design method; achieving the information exchange of system between the characteristics object models and database.

Abstract: Planner multi-linkage mechanism is widely used in the manufacturing industry. In this paper, a kind of planner R-2RRP-RRR mechanism is researched. The kinematics simulation model is established and implemented for this kind of mechanism based on SimMechanics and Adams respectively. Through simulation, the motion rule for the key part of mechanism is obtained. The simulation results show that this method is effective and efficient when the simulation is implemented for a certain machine system. Meanwhile, it provides a foundation for design and manufacturing of the mechanism in the future.

Abstract: The effect of cement type and the air-entraining agent on microbially induced carbonate precipitation in cement paste has been studied. Results indicate that after biodeposition treatment, Sulphoaluminate cement paste behaved with a higher growth rate of compressive strength than OPC paste. Incorporation of air-entraining agent increased the growth rate of compressive strength of sulphoaluminate cement paste. Calcite was formed through microbially induced carbonate precipitation in cement pastes. Sulphoaluminate cement paste achieved a larger amount of calcite than OPC paste.

Abstract: The introduction of the virtual instrument technology provides new ideas for the developments of the temperature acquisition. This paper presents the design of temperature acquisition system based on VI technology. This system takes LABVIEW as the software development platform, simulating environmental temperature parameters via temperature sensors and heaters. Through the USB-6009 data collecting cards environmental temperature is sent to LABVIEW software platform for analysis. The system has the functions of data acquisition, display, storage, callback, save, analysis, printing statements and limit alarm processing and so on, and completes the real-time collection and analysis of the temperature.

Abstract: Accurate short-term load forecasting contributes to safe and economic operation of power systems. Due to the shortcomings of traditional wavelet neural network (WNN), which usually has low convergence rate and easily falls into local minimum, an improved wavelet neural network (IWNN) is proposed to modify the algorithm by introducing momentum. Together with the weighted average method (WA) and WNN, these three methods are applied to an example of short-term load forecasting. The results show that compared with the WA method, WNN has obvious advantages of nonlinear fitting and forecasting, and the IWNN method is superior to the others in terms of prediction accuracy and generalization capability, which is helpful to further improve the accuracy of short-term load forecasting.

Abstract: For the requirements of volume of cage, load and lifting height, Elevate mechanism of large-scale multi-stage direct-acting hydraulic hoist are adopted when construction hoist lifts material and staff in high-rise construction. Multi-stage expansion of hydraulic cylinder can cause towing oil pipe frequently. Friction and wear between oil pipe and framework is appeared, and oil pipe bursting is occurred. It directly influences both the constructing progress and safety operation. With the ingenious design of hydraulic cylinder and pipe connecting mode, oil pipe towing is avoided telescoping hydraulic cylinder. It provides a new way in other connecting mode of hydraulic system.

Abstract: This paper proposed a three-phase three wire UPQC (hybrid UPQC). The topology is novel which consists of a series and a hybrid shunt filters. The unique topology can reduce the capacity of power devices in the hybrid UPQC when compensating source harmonic currents. In this paper a detailed design about the main circuit is presented. Finally a simulation study of the proposed hybrid UPQC has been carried out by using MATLAB/Simulink. The results verified the effectiveness of the UPQC topology.