Effect of Processing Route on the Morphology of Thermoplastic Polyurethane (TPU) Nanocomposites Incorporating Organofluoromica

Abstract:

In the production of polymer nanocomposites, the processing method determines the dispersion of the nanofiller and hence, the final nanocomposite properties. In this work, the potential of high energy milling of the organofluoromica to improve the platelet dispersion and exfoliation in both solvent cast and melt processed thermoplastic polyurethane (TPU)/organofluoromica nanocomposites was investigated. The potential of high energy milling of the organofluoromica to improve the platelet dispersion and exfoliation in both solvent cast and melt processed thermoplastic polyurethane (TPU)/organofluoromica nanocomposites was investigated. The applied high energy milling process has successfully reduced this nanofiller platelet length from 640 nm to 400 nm and 250 nm after 1 hour and 2 hours respectively. These lower aspect ratio milled nanofillers resulted in improved quality of dispersion and delamination when incorporated into the TPU and hence interacted more preferentially with the TPU matrix.

• Periodical: Advanced Materials Research (Volume 832)
• Pages: 27-32
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.832.27
• Online since: November 2013
• Authors: Azlin Fazlina Osman, Kevin Jack, Grant Edwards, Darren Martin
• Keywords: Morpholoy, Nanocomposite, Processing, Thermoplastic Polyurethane (TPU)

References

[1] A.F. Osman, et al., Engineered nanofillers: impact on the morphology and properties of biomedical thermoplastic polyurethane nanocomposites. RSC Advances, 24 (2012) 9154-9164.

DOI: 10.1039/c2ra21420b

[2] A.F. Osman, et al., Structure–Property Relationships in Biomedical Thermoplastic Polyurethane Nanocomposites. Macromolecules, 45 (2012) 198-210.

[3] K. T. Campbell, The structure of segmented polyurethane nanocomposites. PhD thesis, University of Queensland, 2005.

[4] B. Finnigan, The morphology and properties of thermoplastic polyurethane nanocomposites. PhD thesis, University of Queensland, 2005.

[5] F. Perrin-Sarazin, M. Sepehr, S. Bouaricha, J. Denault, Potential of ball milling to improve clay dispersion in nanocomposites. J. Poly. Eng. & Sci. 49 (2009) 651-665.

DOI: 10.1002/pen.21295

[6] B. Finnigan, B. et al., Segmented polyurethane nanocomposites: Impact of controlled particle size nanofillers on the morphological response to uniaxial deformation. Macromolecules, 38 (2005) 7386-7396.

DOI: 10.1021/ma0508911

[7] B. Finnigan, et al., Impact of controlled particle size nanofillers on the mechanical properties of segmented polyurethane nanocomposites. Int. J. of Nanotechnology 4(2007) 496-515.

DOI: 10.1504/ijnt.2007.014747

[8] D. Martin, G. Edwards, Granted International Patent Application AU 2005279677 Polymer composites having particles with mixed organic modifications, (2011).

[9] H. Dennis, et al., Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites. Polymer 42(2001) 9513-9522.

DOI: 10.1016/s0032-3861(01)00473-6

[10] B.Finnigan et. al, Morphology and properties of thermoplastic polyurethane composites incorporating hydrophobic layered silicates. J. Appl. Polym. Sci. 97 (2005) 300-309.

DOI: 10.1002/app.21718