Paper Titles

Development of a Bike Component by Topological Optimization Methods
p.117

Static Analysis of the Hydraulically Actuated Reversing Mechanism of a Reversible Agricultural Plough
p.127

Influence of Fiber and CO₂ Laser Cutting Parameters on the Material Properties of Wear-Resistant Hardox 450 Steel
p.137

Cylindricity Error by Least Square and Minimum Zone Fitting
p.149

Theoretical Foundations of Mechanical Design for Improving Machine Productivity during the Cutting Process
p.161

Tool Life Estimation and Optimization Using a Stacking Regressor and Whale Optimization Algorithm (WOA) in Micromilling
p.169

Research on the Wear of Cutting Inserts during the Processing of Waste Construction Glass
p.181

Failure Analysis of Thin-Walled Extruded Aluminum Tubes Using MSFLD-Based Criteria
p.193

Evaluation of Friction Coefficient During Single Point Incremental Forming of Commercial Purity Aluminium Alloy
p.205

HomeAdvances in Science and TechnologyAdvances in Science and Technology Vol. 181Theoretical Foundations of Mechanical Design for...

Theoretical Foundations of Mechanical Design for Improving Machine Productivity during the Cutting Process

Article Preview

Abstract:

This research presents a model for calculating the productivity of metal removal during external cylindrical grinding, taking into account the instability of the technological process during the workpiece operating cycle and during the processing of a set of products. The relationship between the productivity of the grinding process using CNC digital control systems and the cutting forces, the physical and mechanical properties of the machined material, the properties of the grinding stone, the rigidity of the technological system, cutting systems, the characteristics of layer removal in areas opposite the wheel rotation, the achieved machining accuracy, and other technological factors affecting the process.

You might also be interested in these eBooks

International Scientific Conference on Advances in Mechanical Engineering (11th ISCAME)

Info:

Periodical:

Advances in Science and Technology (Volume 181)

Pages:

161-167

DOI:

https://doi.org/10.4028/p-3Ohet2

Citation:

Cite this paper

Online since:

August 2026

Authors:

Masar Alsigar*, Mahmood Alhafadhi, Ali Lafta, Osamah Mayoof, Huda Al-Murshidi

Keywords:

Actual, Force, Grinding, Manufacturing, Material, Mechanical Properties

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2026 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Pereverzev, P. (2020). An approach to complex model ECGA for the stable and unstable grinding conditions. IOP Conference Series: Materials Science and Engineering, 971 (2), Article 022037.

DOI: 10.1088/1757-899X/971/2/022037

[2] Alsigar, M. (2020). Model of Processing Accuracy Prediction with Consideration of Multi-stage Process of Circular Grinding with Axial Feed. IOP Conference Series: Materials Science and Engineering, 709 (3), Article 033006.

DOI: 10.1088/1757-899X/709/3/033006

[3] Pavel, P.P. (2019). Designing of Optimal Grinding Cycles, Sustainable to Unstable Mechanical Processing on the Basis of Synthesis of Digital Double Technology and Dynamic Programming Method. In: Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019), Sochi, pp.225-232.

DOI: 10.1007/978-3-030-22063-1_25

[4] Masar, K. (2018). Improvement of the Quality of Designed Cylindrical Grinding Cycle with Traverse Feeding Based on the Use of Digital Twin Options. MATEC Web of Conferences, 224, Article 01033.

DOI: 10.1051/matecconf/201822401033

[5] Alhafadhi, M. (2024). Influence of heat input and preheating on residual stresses in pipe weld. Pollack Periodica.

DOI: 10.1556/606.2023.00589

[6] Mahamod Alhafadhi. (2024). Developing Optimal Automated Cycles for Achieving Maximum Efficiency Using Dynamic Programming. In: Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2024), pp.542-554.

DOI: 10.1007/978-3-031-65870-9_50

[7] Qi, Q., Tao, F. (2018). Digital Twin and Big Data Towards Smart Manufacturing and Industry 4.0: 360 Degree Comparison. IEEE Access, p.3585–3593.

DOI: 10.1109/ACCESS.2018.2793265

[8] Tao, F., Zhang, H., Liu, A., et al. (2019). Digital Twin in Industry: State-of-the-Art. IEEE Transactions on Industrial Informatics, 15, 2405–2415.

DOI: 10.1109/TII.2018.2873186

[9] Rosen, R., Von Wichert, G., Lo, G., et al. (2015). About the importance of autonomy and digital twins for the future of manufacturing. IFAC PapersOnLine, 48 (3), 567–572.

DOI: 10.1016/j.ifacol.2015.06.141

[10] Liu, J., Zhou, H., Tian, G., et al. (2019). Digital twin-based process reuse and evaluation approach for smart process planning. International Journal of Advanced Manufacturing Technology, 100, 1619–1634.

DOI: 10.1007/s00170-018-2748-5

[11] Zhang, C., Xu, W., Liu, J., et al. (2019). A reconfigurable modeling approach for digital twin-based manufacturing system. Procedia CIRP, 83, 118–125.

DOI: 10.1016/j.procir.2019.03.141

[12] Cheng, J., et al. (2018). Digital twin-driven product design, manufacturing and service with big data. International Journal of Advanced Manufacturing Technology, 94, 3563–3576.

DOI: 10.1007/s00170-017-0233-1

[13] Akintseva, A.V., Ardashev, D.V. (2019). Designing optimal automatic cycles of round grinding based on the synthesis of digital twin technologies and dynamic programming method. Mechanical Sciences, 10 (1), 331–341.

DOI: 10.5194/ms-10-331-2019

[14] Alsigar, M. (2021). Optimal Design of Grinding Systems with Use of Mathematical Complex Models ECGA. Materials Today: Proceedings, 38, 1521–1525.

DOI: 10.1016/j.matpr.2020.08.142

[15] Pereverzev, P. (2021). Multi-stages to Ensure Quality Control of Designing and Production at External Cylindrical Grinding Machines. In: Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020), p.370–377.

DOI: 10.1007/978-3-030-54817-9_43

[16] Kadhim Alsigar (2019). Modeling Relationship between Different Stages of Cylindrical Grinding Process with Axial Feed in Reversal Zones. Lecture Notes in Mechanical Engineering, p.1715–1722.

DOI: 10.1007/978-3-319-95630-5_184

[17] Pavel. P (2018). Impact of Metal Removal Features in the Reverse Zones on Shaping of the Machined Surface in the Process of Cylindrical Grinding with Traverse Feed. MATEC Web of Conferences, 224, Article 01034.

DOI: 10.1051/matecconf/201822401034

[18] Alsigar, M.K. (2019). Use of Dynamic Programming Method to Design for Optimal Performance of Grinding Cycles. Lecture Notes in Mechanical Engineering, p.1709–1714.

DOI: 10.1007/978-3-319-95630-5_183

[19] F. Tao, J. Cheng, Q. Qi, M. Zhang, H. Zhang, and F. Sui, "Digital Twin-driven product design, manufacturing and service with big data," Int J Adv Manuf Technol, vol. 94, p.3563–3576, 2018.

DOI: 10.1007/s00170-017-0233-1

[20] R. Wagner, B. Schleich, B. Haefner, A. Kuhnle, S. Wartzack, and G. Lanza, "Challenges and potentials of Digital Twins and industry 4.0 in product design and production for high performance products," Procedia CIRP, vol. 84, p.88‒93, 2019.

DOI: 10.1016/j.procir.2019.04.219

[21] R. Stark, C. Fresemann, and K. Lindow, "Development and operation of Digital Twins for technical systems and services," CIRP Ann, vol. 68, no. 1, p.129–132, 2019.

DOI: 10.1016/j.cirp.2019.04.024

[22] Y. Altintas, P. Kersting, D. Biermann, E. Budak, B. Denkena, and I. Lazoglu, "Virtual process systems for part machining operations," CIRP Ann, vol. 63, no. 2, p.585‒605, 2014.

DOI: 10.1016/j.cirp.2014.05.007

[23] Y. Cheng, F. Wang, S. Li, B. J. Xiao, and F. Yang, "The implementation of a data acquisition and service system based on HDF5," Fusion Eng Des, vol. 112, p.975‒978, 2016.

DOI: 10.1016/j.fusengdes.2016.02.047

[24] S. Gao, C. Yang, J. Xu, J. Fu, H. Su, and W. Ding, "Optimization for internal traverse grinding of valves.

[25] K. D. Traxel and A. Bandyopadhyay, "First demonstration of additive manufacturing of cutting tools using directed energy deposition system: satellite based cutting tools," Addit. Manuf. vol. 25, p.460–468, 2019.

DOI: 10.1016/j.addma.2018.11.019

[26] Q. Qi and F. Tao, "Digital Twin and big data towards smart manufacturing and industry 4.0: 360-degree comparison," IEEE Access vol. 6, p.3585‒3593, 2018.

DOI: 10.1109/access.2018.2793265

[27] F. Tao, H. Zhang, A. Liu, and A. Y. C. Nee, "Digital Twin in industry, State-of-the art," IEEE Trans Ind Informatics vol. 15, no. 4, p.2405‒2415, 2019.

DOI: 10.1109/tii.2018.2873186

[28] R. Rosen, G. von Wichert, G. Lo, and K. D. Bettenhausen, "About the importance of autonomy and Digital Twins for the future of manufacturing," IFAC PapersOnLine, vol. 48, no. 3, p.567‒572, 2015.

DOI: 10.1016/j.ifacol.2015.06.141

[29] J. Liu, H. Zhou, G. Tian, X. Liu, and X. Jing, "Digital Twin-based process reuse and evaluation approach for smart process planning," Int J Adv Manuf Technol, vol. 100, p.1619–1634, 2019.

DOI: 10.1007/s00170-018-2748-5

[30] Nemes, C., Javorek, L., Bodzás, S., & Pálinkás, S. (2019). The Measurement of the Three Components of the Cutting Force During the Turning Process. International Journal of Engineering and Management Sciences, 4(1), 139–146.

DOI: 10.21791/ijems.2019.1.17.

[31] Masar, A. (2026). Technological Constraints of Modern Processes and Equipment in Cutting Operations. 11th International Conference on Industrial Engineering. ICIE 2025. Lecture Notes in Mechanical Engineering. Springer, Cham.

DOI: 10.1007/978-3-032-04273-6_45

[32] Mahmood, Alhafadhi (2026). Digital twin model for performance analysis and manufacturing process optimization. Pollack Periodica, p.270–277.

DOI: 10.1556/606.2025.01511

[33] A. Mahmood. Strategic analysis of limitations in high-performance machining systems. Results in Engineering, vol. 27, 2025, Art no. 105991.

DOI: 10.1016/j.rineng.2025.105991

[34] Kumar, S. Santhosh.Numerical Simulation of Residual Stresses Induced by MIG Welding Considering Initial Conditions. Materials Science Forum, V.1153. pp.33-41, 2024.

DOI: 10.4028/p-bHfk2w

[35] AlMawash A.D. Modeling Metal Removal in Automatic Circular Grinding Cycles Taking into Account Process Dynamics. Lecture Notes in Mechanical Engineering, pp.335-343, 2021.

DOI: 10.1007/978-3-030-54817-9_39

[36] Akintseva A.V. Virtual Prediction of Accuracy of Processing on Example of External Circular Grinding. Lecture Notes in Mechanical Engineering, pp.217-224, 2020.

DOI: 10.1007/978-3-030-22063-1_24