Shape and Distribution of Pores in SiC Ceramic Membrane Supports Formed by Extrusion Molding

Kai Qi Liu; Zhi Yong Luo; Feng Kang; Bing Jun Wang; Fei Gao; Yong Feng Liu

doi:10.4028/www.scientific.net/KEM.680.99

Paper Titles

MLD Method for the Determination of Major Components in MgO-Cr Refractory Products
p.76

Numerical Simulation of Powder Dispersion Performance by Different Mesh Types
p.82

High Temperature Oxidation Behavior of Silicon Carbide Ceramic
p.89

Influence of Density on the Microstructure, Mechanical, Electrical and Thermal Properties of Recrystallized Silicon Carbide
p.93

Shape and Distribution of Pores in SiC Ceramic Membrane Supports Formed by Extrusion Molding
p.99

Effects of Silicon Particle Size on the Morphology of Rod-Like Si₃N₄Crystals Prepared by SHS Method
p.103

Distribution Status of Trace Oxygen in Fe₃Si-Si₃N₄
p.107

Spinnable Sol Prepared by NHSG Method Used for Mullite Continues Fiber
p.111

On the Factors Influencing the Liquidity of Slip Casting Al₂O₃ Slurry
p.115

HomeKey Engineering MaterialsKey Engineering Materials Vol. 680Shape and Distribution of Pores in SiC Ceramic...

Shape and Distribution of Pores in SiC Ceramic Membrane Supports Formed by Extrusion Molding

Abstract:

The SiC ceramic membrane supports by using four different processes were prepared by extrusion molding process. Shape and distribution of pores in SiC ceramic membrane supports were observed by SEM, Meanwhile the O-ring strength was measured. By analyzing the relationship between pores’ shape, distribution and O-rings strength, the optimal data of apparent porosity and the optimal pores’ shape and distribution was obtained. By means ofusing similar particle sizes, particles modification, controlling drying rate of the green body and controlling the contents of glass phase in neck part between SiC particles formed at the high temperature, the SiC ceramic membrane supports with the O-ring strength greater than 20 MPa were prepared.

You might also be interested in these eBooks

Properties and Testing Techniques of Inorganic Materials

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 680)

Pages:

99-102

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.680.99

Citation:

Cite this paper

Online since:

February 2016

Authors:

Kai Qi Liu*, Zhi Yong Luo, Feng Kang, Bing Jun Wang, Fei Gao, Yong Feng Liu

Keywords:

Ceramic Membrane, Distribution, Extrusion Molding, Pores, Shape, SiC, Support

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Avci G G, Misirli Z, Günay V. Processing and characterization of microfiltration supports prepared from alumina powders[J]. Ceramics international, 1996, 22(1): 23-26.

DOI: 10.1016/0272-8842(95)00048-8

Google Scholar

[2] Maarten Biesheuvel P, Verweij H. Design of ceramic membrane supports: permeability, tensile strength and stress[J]. Journal of membrane science, 1999, 156(1): 141-152.

DOI: 10.1016/s0376-7388(98)00335-4

Google Scholar

[3] Shqau K, Mottern M L, Yu D, et al. Preparation and Properties of Porous α-Al2O3 Membrane Supports[J]. Journal of the American Ceramic Society, 2006, 89(6): 1790-1794.

DOI: 10.1111/j.1551-2916.2006.01037.x

Google Scholar

[4] Kwon S, Messing G L. Constrained densification in boehmite–alumina mixtures for the fabrication of porous alumina ceramics[J]. Journal of materials science, 1998, 33(4): 913-921.

Google Scholar

[5] XieZhipeng. Structural Ceramics. Beijing: Tsinghua Press (2011).

Google Scholar