Effects of Temperature on Deep Drawing of an Aluminum Alloy for Different Yield Criteria and Hardening Models

Abstract:

In this study, the influences of temperature variation in deep drawing process are investigatedby changing the temperatures of the whole blank, a part of the blank, the punch and die fordifferent yield criteria and hardening models. Von-Mises criterion with isotropic, kinematic and combinedhardening and, Hill48 and Yld2003 yield criteria with isotropic hardening are considered toform the constitutive relations. Circular, square and complex shaped parts made of AA5754 materialare used in the numerical analyses. The local heating simulations are conducted for circular blanksand the drawability of the parts are evaluated by using the Johnson-Cook failure criteria. Hot formingand quenching and local heating analyses are also carried out for a complex shaped part. The resultsobtained by the finite element analyses for different constitutive equations are compared with eachother and experimental results according to thickness strain distribution, punch force variation andrim shape of the deformed blanks.

• Periodical: Key Engineering Materials (Volume 926)
• Pages: 784-801
• DOI: https://doi.org/10.4028/p-s91nhk
• Online since: July 2022
• Authors: Rasih Hakan Demirkol*, Haluk Darendeliler
• Keywords: Deep Drawing, Hardening Model, Yield Criteria

References

[1] M. A. Basril, H. M. Teng, M. Azuddin, and I. A. Choudhury, The effect of heating temperature and methods towards the formability of deep drawn square metal cup,, IOP Conference Series: Materials Science and Engineering, vol. 210, no. 1, (2017).

DOI: 10.1088/1757-899x/210/1/012067

[2] H. Laurent, J. Coër, P. Y. Manach, M. C. Oliveira, and L. F. Menezes, Experimental and numerical studies on the warm deep drawing of an Al-Mg alloy,, International Journal of Mechanical Sciences, vol. 93, pp.59-72, (2015).

DOI: 10.1016/j.ijmecsci.2015.01.009

[3] N. Abedrabbo, F. Pourboghrat, and J. Carsley, Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models,, International Journal of Plasticity, vol. 23, no. 5, pp.841-875, (2007).

DOI: 10.1016/j.ijplas.2006.10.005

[4] F. Barlat, J. Brem, J. Yoon, K. Chung, R. Dick, D. Lege, F. Pourboghrat, S. H. Choi, and E. Chu, Plane stress yield function for aluminum alloy sheets part 1 : theory,, International Journal of Plasticity, vol. 19, pp.1297-1319, (2003).

DOI: 10.1016/s0749-6419(02)00019-0

[5] R. H. Demirkol, Analysis of Effects of Temperature Variation on Deep Drawing Process Using Different Constitutive Laws, MSc. Thesis, Middle East Technical University, (2019).

[6] O. El Fakir, L. Wang, D. Balint, J. P. Dear, J. Lin, and T. A. Dean,Numerical study of the solution heat treatment, forming, and in-die quenching (hfq) process on aa5754,, International Journal of Machine Tools and Manufacture, vol. 87, pp.39-48, (2014).

DOI: 10.1016/j.ijmachtools.2014.07.008

[7] F. Cogun and H. Darendeliler, Comparison of different yield criteria in various deep drawn cups,, International Journal of Material Forming, vol. 10, no. 1, pp.85-98, (2017).

DOI: 10.1007/s12289-015-1258-3

[8] R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals , Proc. R. Soc. London 193, 281-297 vol. 10, no. 1, pp.85-98, (2017).

[9] H. K. Farahani, Determination of Johnson Cook Plasticity Model Parameters for Inconel718,, no. October, (2017).

[10] H. Aretz, A non-quadratic plane stress yield function for orthotropic sheet metal , J Mat Proc Technol, 168:1-9, 2005.[11] J. Winklhofer, G. Trattnig, C. Lind, C. Sommitsch, and H. Feuerhuber, Simulation of aluminium sheet metal deep drawing at elevated temperatures using LS-Dyna,, AIP Conference Proceedings, vol. 1252, pp.927-934, (2010).

DOI: 10.1063/1.3457656

[12] M. Rodriguez-Millan, D. Garcia-Gonzalez, A. Rusinek, and A. Arias, Influence of Stress State on the Mechanical Impact and Deformation Behaviors of Aluminum Alloys,, Metals, vol. 8, no. 7, p.520, (2018).

DOI: 10.3390/met8070520

[13] A. H. van Deen Boogaard, Thermally Enhanced Forming of Aluminium Sheet, Ph.D. Thesis, University of Twente, (2002).