Mechanical and Thermal Properties of Hybrid Non-Woven Kenaf Fibre Mat-Graphene Nanoplatelets reinforced Polypropylene Composites

Abstract:

In this study, kenaf fibre mat (NWKFM)-graphene nanoplatelets (GNP) reinforced polypropylene (PP) composites were fabricated by using compression moulding. The hybridization was done to enhance the mechanical and thermal properties by adding different amount of graphene nanoplatelets as filler in the biocomposite samples. Pure PP and nanocomposite samples of PP+GNP were also fabricated. Maleic anhydride grafted polypropylene (MAPP) was used as a coupling agent to increase the interfacial adhesion of matrix and reinforcement of the biocomposites and hybrid composites samples. The chemical composition and constituent changes were studied by using Fourier transform infrared spectroscopy (FTIR) analysis. The mechanical properties in term of flexural and tensile were tested using a universal testing machine (UTM). Thermogravimetric analysis (TGA) was carried out to determine the thermal stability of the composite’s samples. Overall, the results show that the stiffness properties (young’s and tensile modulus) of pure PP and biocomposites enhanced with addition of GNP. The flexural strength also shows promising result with the inclusion of GNP. However, the tensile strength shows a reduction with the addition of GNP. The TGA results reveal that the addition of GNP increases the thermal stability of pure PP and the biocomposites based on the comparison of T_onset values.

• Periodical: Materials Science Forum (Volume 1010)
• Pages: 124-129
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.1010.124
• Online since: September 2020
• Authors: Haziq Amri Mohd, Mohamad Bashree Abu Bakar*, Mohamad Najmi Masri, Muhammad Azwadi Sulaiman, Mohd Hazim Mohamad Amini, Sarizam Mamat, Mazlan Mohamed
• Keywords: Graphene Nanoplatelets, Kenaf Fibre Mat, Mechanical Properties, Polypropylene, Thermal Properties

References

[1] Y.A. El-Shekeil, S.M. Sapuan, A. Khalina, E.S. Zainudin and O.M. Al-Shuja'a, Influence of chemical treatment on the tensile properties of kenaf fiber reinforced thermoplastic polyurethane composite, Applied Nanoscience. 4 (2012), 279-291.

DOI: 10.3144/expresspolymlett.2012.108

[2] M.A. Abd Latif, M.E. Abd Manaf, L. Maslamany, M.S.M. Hussain and N. Mohamad, Mechanical properties of short fiber and non-woven kenaf reinforced polypropylene composites: Effects of oil palm shell powder addition, Applied Mechanics and Materials. 815 (2015), 111-115.

DOI: 10.4028/www.scientific.net/amm.815.111

[3] R.J. Young, M. Liu, I.A. Kinloch, S. Li, X. Zhao, C. Vall and D.G. Papageorgiou, The mechanics of reinforcement of polymers by graphene nanoplatelets, Composites Science and Technology. 154 (2018), 110-116.

DOI: 10.1016/j.compscitech.2017.11.007

[4] A.J. Duguay, J.W. Nader, A. Kiziltas, D.J. Gardner and H.J. Dagher, Exfoliated graphite nanoplatelet-filled impact modified polypropylene nanocomposites: Influence of particle diameter, filler loading, and coupling agent on the mechanical properties, Applied Nanoscience. 4 (2014), 279-291.

DOI: 10.1007/s13204-013-0204-2

[5] S.O. Han, M. Karevan, M.A. Bhuiyan, J.H. Park and K. Kalaitzidou, Effect of exfoliated graphite nanoplatelets on the mechanical and viscoelastic properties of poly(lactic acid) biocomposites reinforced with kenaf fibers, Journal of Materials Science. 47 (2012), 3535-3543.

DOI: 10.1007/s10853-011-6199-8

[6] M. Sclavons, M. Laurent, J. Devaux and V. Carlier, Maleic anhydride-grafted polypropylene: FTIR study of a model polymer grafted by ene-reaction, Polymer. 46 (2005), 8062-8067.

DOI: 10.1016/j.polymer.2005.06.115

[7] C.I. Idumah and A. Hassan, Hibiscus cannabinus fiber/PP based nano-biocomposites reinforced with graphene nanoplatelets, Journal of Natural Fibers. 14 (2017), 691-706.

DOI: 10.1080/15440478.2016.1277817

[8] C.I. Idumah and A. Hassan, Characterization and preparation of conductive exfoliated graphene nanoplatelets kenaf fibre hybrid polypropylene composites, Synthetic Metals. 212 (2016), 91-104.

DOI: 10.1016/j.synthmet.2015.12.011

[9] M.S. Mohaiyiddin, O.H. Lin, H.M. Akil, T.G. Yee, N.N.A.N. Adik and A.R. Villagracia, Effects of polypropylene methyl polyhedral oligomeric silsesquioxanes and polypropylene-grafted maleic anhydride compatibilizers on the properties of palm kernel shell reinforced polypropylene biocomposites, Polímeros, 26 (2016), 228-235.

DOI: 10.1590/0104-1428.2038

[10] S.Y. Fu, X.Q. Feng, B. Lauke and Y.W. Mai, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites, Composites Part B: Engineering. 39 (2008), 933-961.

DOI: 10.1016/j.compositesb.2008.01.002

[11] M.B. Abu Bakar, M.N Masri, M.H. Mohamad Amini, M. Mohamed, M.A. Sulaiman, N.A.A. Nik Yusuf, M.Z. Mohd Thirmizir and Z.A. Mohd Ishak, Mechanical and morphological properties of meranti wood flour filled polypropylene composites, Materials Science Forum. 840 (2016), 91-96.

DOI: 10.4028/www.scientific.net/msf.840.91