Tribological Behaviors of Dense Gelcasting Nanocomposites

Sung Hun Cho; Sang Hoon Jeong; Bum Sung Kim; Tohru Sekino; Soo Wohn Lee; Seung Ho Kim

doi:10.4028/www.scientific.net/MSF.868.56

Paper Titles

Effect of Degassing Treatment on the Crystalline Morphology of XLPE Insulation Used for 110kV XLPE Cable
p.33

Oxidation of Pentatitanium Trisilicide (Ti₅Si₃) Powder at High Temperature
p.38

Energy Consumption in Batch-Mode Capacitive Deionization
p.43

The Investigation of Electrical Properties for Mica/Epoxy Insulation Stator Bars during the Thermal Cycle Aging Test
p.50

Tribological Behaviors of Dense Gelcasting Nanocomposites
p.56

Dielectric Properties of Liquid Crystal Polymer Composites with High Thermal Conductivity
p.61

Effect of Silica on the Wettability and Composition of the Alumina/Aluminum Interface
p.68

Photoluminescence Properties of the Magnetoplumbite-Type BaMg₆Ti₆O₁₉:Mn⁴⁺ and Spinel-Type Mg₂TiO₄:Mn⁴⁺
p.73

Cationic Distribution and Electrical Properties of Ni_0.6Mn₂Si_0.4-xAl_xO₄ (0≤x≤0.04) NTC Thermistor
p.79

HomeMaterials Science ForumMaterials Science Forum Vol. 868Tribological Behaviors of Dense Gelcasting...

Tribological Behaviors of Dense Gelcasting Nanocomposites

Abstract:

Gelcasting/pressure less sintered Al₂O₃/SiC nanocomposites has a low sinterability. Also, mechanical and wear properties of these nanocomposites was degraded. Wear mechanism of low sinterability gelcasting nanocomposites was dominated by fracture mode of surface during wear tests. In this study, gelcasting processing and followed plressureless (PL) and hot isostatic pressing (HIP) sintering was attempted to fabricate dense Al₂O₃/SiC nanocomposites. Wear behaviors of high densities gelcasting nanocomposites were investigated under the identical wear test condition. The comparative specimen was used to hot pressed nanocomposites. Wear rates of dense gelcasting nanocomposites were related to closely initial friction coefficient.

You might also be interested in these eBooks

Eco-Materials Processing and Design XVII

View Preview

Info:

Periodical:

Materials Science Forum (Volume 868)

Pages:

56-60

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.868.56

Citation:

Cite this paper

Online since:

August 2016

Authors:

Sung Hun Cho, Sang Hoon Jeong, Bum Sung Kim, Tohru Sekino, Soo Wohn Lee, Seung Ho Kim*

Keywords:

Gelcasting, Nanocomposite, Sintering, Tribological Property

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] K. Niihara, New design concept of structural ceramics - ceramic nanocomposites, J. Ceram. Soc. Jpn. 99 (1991) 974-982.

DOI: 10.2109/jcersj.99.974

Google Scholar

[2] M. Sternitzke, Structural ceramic nanocomposites, J. Eur. Ceram. Soc. 17 (1997) 1061-1082.

Google Scholar

[3] J.S. Ha, C.S. Lim, C.S. Kim, and D.S. Cheong, A new process for Al2O3/SiC nanocomposites by polycarbosilane infiltration, Mater. Chem. Phys. 75 (2002) 241-245.

DOI: 10.1016/s0254-0584(02)00069-x

Google Scholar

[4] L.A. Timms, and C.B. Ponton, Processing of Al2O3/SiC nanocomposites—part 1: aqueous colloidal processing, J. Eur. Ceram. Soc. 22 (2002) 1553-1567.

DOI: 10.1016/s0955-2219(01)00465-4

Google Scholar

[5] K. Niihara, B. -S. Kim, T. Nakayama, T. Kusunose, T. Nomoto, A. Hikasa, T. Sekino, Fabrication of complex-shaped alumina/nickel nanocomposites by gelcasting process, J. Euro. Ceram. Soc. 24 (2004) 3419-3425.

DOI: 10.1016/j.jeurceramsoc.2003.10.027

Google Scholar

[6] S.H. Jeong, S.H. Kim, T.H. Kim, S.H. Cho, G. Gyawali, S.W. Lee, Effects of solid lubricant and laser surfacetexturing on frictional performance of pulse electric current sintered Al2O3–ZrO2 composites, Ceramics International. 42 (2016) 7830–7836.

DOI: 10.1016/j.ceramint.2016.02.018

Google Scholar

[7] S.H. Kim, S.W. Lee, Y.H. Kim, D.H. Riu, T. Sekino, and K. Niihara, Sliding Wear of Alumina-silicon Carbide Nanocomposites, J. Kor. Ceram. Soc. 38 (2001) 1080-1084.

Google Scholar