Numerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint Specimen

Abstract:

In this study, dynamic temperature field in a dissimilar steel joint specimen was numerically analyzed by means of three-dimensional explicit finite element analysis. Fully coupled thermal stress analysis was performed by using FE-code Abaqus/Explicit ver. 6.12. It was assumed that 90% of the plastic work was transferred to heat. Furthermore, dynamic loading tests were conducted with three-point bending specimen extracted from the dissimilar steel joint between a mild steel and a high tensile strength class steel. The specimen included a U-shape notch in the bonded interface. A high-speed infrared camera was used to measure the temperature field near the bonded interface. The temperature field was recorded at a frame rate of 200 Hz during the dynamic loading test. The numerically calculated temperature field near bonded interface showed reasonable agreement with the temperature field measured by the high-speed infrared thermography. The temperature in the soft steel particularly increased during the dynamic loading. On the other hand, the increase in temperature in the hard steel area was relatively few.

• Periodical: Materials Science Forum (Volume 941)
• Pages: 280-286
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.941.280
• Online since: December 2018
• Authors: Yasuhito Takashima*, Fumiyoshi Minami
• Keywords: Adiabatic Heating, Dissimilar Joints, Dynamic Finite Element Analysis, Dynamic Loading, Infrared Thermography

References

[1] A. Needleman, V. Tvergaard, An analysis of dynamic, ductile crack growth in a double edge cracked specimen, Int. J. Fracture, 49 (1991) 41–67.

DOI: 10.1007/bf00013502

[2] A. Rossoll, C. Berdin, P. Forget, C. Prioul, B. Marini, Mechanical aspects of the Charpy impact test, Nucl. Eng. Des., 188 (1999) 217–229.

DOI: 10.1016/s0029-5493(99)00017-5

[3] Y. Takashima, Y.S. Yamada, T. Handa, S. Igi, K. Oi, F. Minami, Numerical analysis of strength mismatch effect on stress field in Charpy specimen, Weld World. 59 (2015) 433–441.

DOI: 10.1007/s40194-014-0217-9

[4] Y. Takashima, T. Handa, F. Minami, Three-Dimensional Dynamic Explicit Finite Element Analysis of Charpy Impact Test, Mater. Sci. Forum. 879 (2017) 1905–(1910).

DOI: 10.4028/www.scientific.net/msf.879.1905

[5] G.I. Taylor, H. Quinney, The latent energy remaining in a metal after cold working. Proc. of the Royal Society of London, 143 (1934) 307–326.

DOI: 10.1098/rspa.1934.0004

[6] Y. Takashima, T. Kawabata, S. Yamada, F. Minami, Observation of micro-cracks beneath fracture surface during dynamic crack propagation, Theor. Appl. Fract. Mech. 92 (2017) 178–184.

DOI: 10.1016/j.tafmec.2017.07.013

[7] P.E. Bennett, G.M. Sinclair, Parameter representation of low-temperature yield behavior of body-centered cubic transition metals. Trans. ASME, 88 (1966) 518–524.

DOI: 10.1115/1.3645890