Integration of Press-Hardening Technology into Processing of Advanced High Strength Steels

Abstract:

Development of high strength or even ultra-high strength steels is mainly driven by the automotive industry which strives to reduce the weight of individual parts, fuel consumption, and CO₂ emissions. Another important factor is the passenger safety which will improve by the use of these materials. In order to achieve the required mechanical properties, it is necessary to use suitable heat treatment in addition to an appropriate alloying strategy. The main problem of these treatments is the isothermal holding time. These holding times are technologically demanding which is why industry seeks new possibilities to integrate new processing methods directly into the production process. One option for making high-strength sheet metals is press-hardening which delivers high dimensional accuracy and a small spring-back effect. In order to test the use of AHSS steels for this technology, a material-technological modelling was chosen. Material-technological models based on data obtained directly from a real press-hardening process were examined on two experimental steels, CMnSi TRIP and 42SiCr. Variants with isothermal holding and continuous cooling profiles were tested. It was found that by integrating the Q&P process (quenching and partitioning) into press hardening, the 42SiCr steel can develop strengths of over 1800 MPa with a total elongation of about 10%. The CMnSi TRIP steel with lower carbon content and without chromium achieved a tensile strength of 1160 MPa with a total elongation of 10%.

• Periodical: Materials Science Forum (Volume 941)
• Pages: 317-322
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.941.317
• Online since: December 2018
• Authors: Hana Jirková*, Kateřina Opatová, Josef Káňa, Dagmar Bublíková, Martin Bystrianský
• Keywords: High Strength Steel, Press-Hardening, Q&P Process, TRIP Steel

References

[1] J. Zhao, Z. Jiang, Thermomechanical processing of advanced high strength steels, Progress in Materials Science. 94 (2018) 174-242.

DOI: 10.1016/j.pmatsci.2018.01.006

[2] H. Aydina, E. Essadiqi, I. Jung, S. Yue, Development of 3rd generation AHSS with medium Mn content alloying compositions, Materials Science and Engineering: A. 564 (2013) 501-508.

DOI: 10.1016/j.msea.2012.11.113

[3] I.B. Timokhina, P.D. Hodgson, E.V. Pereloma, Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels, Metall Mat Trans A: Phys Metall Mat Sci. 35A (2004) 2331-41.

DOI: 10.1007/s11661-006-0213-9

[4] W. Bleck, Using the TRIP efekt – the down of a promising group of cold formable steels, in: B.C. De Cooman (Eds.), Proceedings of the International Conference on TRIP – Aided High Strength Ferrous Alloys, GRIPS' SPARKLING WORLD OF STEEL, Aachen, 2002, pp.13-24.

DOI: 10.1002/srin.200200198

[5] Ch.G. Lee, S.J. Kim, T.H. Lee, S.Lee, Effects of volume fraction and stability of retained austenite on formability in a 0,1C-1,5Si-1,5Mn-0,5Cu TRIP-aided cold-rolled steel sheet, Materials Science and Engineering A. 371 (2003) 16-23.

DOI: 10.1016/s0921-5093(03)00035-2

[6] B.C. De Cooman, Structure-properties relationship in TRIP steels containing carbide-free bainite, Current opinion in Solid State and Materials Science. 8 (2004) 285-303.

DOI: 10.1016/j.cossms.2004.10.002

[7] D.V. Edmonds et al, Quenching and partitioning martensite – A novel steel heat treatment. Materials Science and Engineering A. 438-440 (2006) 25–34.

DOI: 10.1016/j.msea.2006.02.133

[8] E.A. Ariza, Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P), Materials Science and Engineering A. 671 (2016), 54-59.

DOI: 10.1016/j.msea.2016.06.038

[9] H. Karbasian, A.E. Tekkaya, A review on hot stamping, Journal of Materials Processing Technology. 210 (2010), 2103-2118.

DOI: 10.1016/j.jmatprotec.2010.07.019

[10] B. Mašek, H. Jirková, L. Kučerová, M. Zemko, Improvement of Mechanical Properties of automotive Components Using Hot Stamping with Integrated Q-P Process, Journal of Iron and Steel Research International. 18 (2011) 730-734.

[11] B. Mašek et al, Transformation-Induced Plasticity in Steel for Hot Stamping, Materiali in Technologije. 48 (2014) 555-557.

[12] L. Kučerová, H. Jirková, B. Mašek, Continuous Cooling of CMnSi TRIP Steel, Materialstoday: Proceedings. 2 (2015), S677-S680.

DOI: 10.1016/j.matpr.2015.07.374