The Effect of Changes in Feed Rate on Surface Integrity during Nickel Coating Grinding

Martin Marek; Martin Novák

doi:10.4028/www.scientific.net/SSP.261.207

Paper Titles

Application of New Abrasives and their Quality Parameters
p.181

Effect of Honing Parameters on Generated Surface Quality of Cylinder Liner within Automotive Engine Production
p.189

An Intelligent Grinding Wheel Wear Monitoring System Based on Acoustic Emission
p.195

Computational Methods for the Assessment of Nanofluids in Abrasive Processes
p.201

The Effect of Changes in Feed Rate on Surface Integrity during Nickel Coating Grinding
p.207

The Influence of Cutting Conditions on Surface Roughness during Steel 100Cr6 Grinding
p.215

An Intelligent Prediction of Surface Roughness on Precision Grinding
p.221

Effect of Substrate Bias and Coating Thickness on the Properties of nc-AlCrN/a-Si_xN_y Hard Coating and Determination of Cutting Parameters
p.229

Types of Tool Wear of AlTiN Coated Cutting Insert after Machining of Weld Overlay
p.237

HomeSolid State PhenomenaSolid State Phenomena Vol. 261The Effect of Changes in Feed Rate on Surface...

The Effect of Changes in Feed Rate on Surface Integrity during Nickel Coating Grinding

Abstract:

Grinding is an important and very frequently used technology, allowing for significant gains in surface integrity. Products which have undergone surface treatment are often used in engineering. The required surface quality after grinding is one of the most important parameters. Nickel coatings as protection against corrosion are used, erosion, abrasion and as a material for the renovation of worn-out parts. This paper discusses the change of cutting conditions when samples were ground. The surface of the samples was treated with galvanically applied nickel. The data shows what level of surface roughness is achieved when choosing different cutting conditions. The results were evaluated on the basis of a comparison of the parameters of roughness. The input parameters were chosen on the basis of the practice, which was in the area carried out.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 261)

Pages:

207-214

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.261.207

Citation:

Cite this paper

Online since:

August 2017

Authors:

Martin Marek*, Martin Novák

Keywords:

Cutting Conditions, Grinding, Nickel Plating, Surface Integrity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] MASLOV, J., N., Teorie broušení kovů. Praha: SNTL - Nakladatelství technické literatury, n. p., 1979. 244-248 s.

Google Scholar

[2] MÁDL, J., KAFKA, J., VRABEC, M., DVOŘÁK, R. Technologie obrábění, 3. díl. Praha: ČVUT, 2000. 81 s.

Google Scholar

[3] HOLEŠOVSKÝ, F., STANČÍK, L., Materiály a technologie obrábění. Ústí nad Labem: UJEP, 1991. 258s.

Google Scholar

[4] NOVÁK, M., HOLEŠOVSKÝ, F. Studium integrity broušeného povrchu [online]. [cit. 2014-2-28]. Dostupné z http: /www. fvt. tuke. sk/journal/pdf08/2-str-11-13. pdf.

Google Scholar

[5] MÁDL, J., HOLEŠOVSKÝ, F.: Integrita obrobených povrchů z hlediska funkčních vlastností, Miroslav Sláma, 1. vyd. Ústí nad Labem: UJEP, FVTM Ústí nad Labem, 2008, 230 s., ISBN 978-80-7414-095-2.

DOI: 10.1093/gmo/9781561592630.article.40395

Google Scholar

[6] Kolektiv autorů, (2004), Terminologie obrábění a montáže, UJEP, Ústí nad Labem.

Google Scholar

[7] NÁPRSTKOVÁ, N., (2012). Vliv očkování slitiny AlSi7Mg0, 3 očkovadlem AlTi5B1 na opotřebení nástroje při jejím obrábění, Strojírenská technologie, č. 5, 6, s. 330-338, ISSN 1211-4162.

Google Scholar

[8] KREJČÍK, V. Povrchová úprava kovů: Pro 2. ročník SOU. První vydání. Praha: SNTL, (1987).

Google Scholar

[9] MALLORY, G. O. a J. B. HAJDU. Electroless Plating - Fundamentals and Applications. Orlando: William Andrew Publishing/Noyes, 1990, 575 s. ISBN 978-0815512776.

Google Scholar