High Temperature Deformation Behavior in the Isothermal Compression of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe Alloy

Abstract:

The deformation behavior in isothermal compression of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe alloy was investigated at the deformation temperature of 800°C, 850°C, 900°C, 950°C and 1000°C, the strain rate of 0.01s^-1, 0.1s^-1, 1.0s^-1 and 10.0s^-1, and the height reduction of 70%. The flow stress increases rapidly with the increasing of strain at the beginning of deformation. When the strain exceeds a certain value, the flow stress begins to decline and becomes steady. With the increasing of deformation temperature and decreasing of strain rate, the steady stress and peak stress decrease significantly. The effect of strain on the processing maps of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe alloy is obvious. As the strain increases, the instable region moves towards high temperature and high strain rate area. Meanwhile, the contour of efficiency of power dissipation becomes more and more intensive, and the region with high efficiency of power dissipation reduces. Strain rate of 0.01s^-1 and deformation temperature of 900°C are the optimum processing parameters for Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe alloy forging under strain of 0.3.

• Periodical: Materials Science Forum (Volume 944)
• Pages: 135-141
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.944.135
• Online since: January 2019
• Authors: Hua Mei Sun*, Yun Lian Qi, Wei Liu, Xiao Nan Mao
• Keywords: Flow Stress, Isothermal Compression, Processing Map, Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe Alloy

References

[1] J.O. Peters, G. Lütjering, M. Koren, H. Puschnik and R.R. Boyer, Processing, microstructure, and properties of β-CEZ, Mater. Sci. Eng. A. 213 (1996) 71-80.

DOI: 10.1016/0921-5093(96)10225-2

[2] J.C. Huang, Workability and application of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe titanium alloy, Titan. Ind. Prog. 5 (1996) 34-36.

DOI: 10.4028/www.scientific.net/msf.944.135

[3] Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark and D.R. Barker, Modeling of dynamic material behavior in hot deformation: forging of Ti-6242, Metall. Mater. Trans. A. 15 (1984) 1883-1892.

DOI: 10.1007/bf02664902

[4] Y.V.R.K. Prasad, Recent advances in the science of mechanical processing, Indian J. Technol. 28 (1990) 435-451.

[5] J. Luo, M.Q. Li, H. Li and W.X. Yu, Hot deformation behavior and flow stress model of TC4 titanium alloy, Trans. Nonferr. Metal. Soc. Chin. 18 (2008) 1395-1401.

[6] B. Wang, H.Z. Guo, Z.K. Yao, J.K. Chen and P.C. Li, Effect of hot pressing parameters on flow stress and microstructure of TA15 alloy, Forg. Stamp. Technol. 31 (2006) 106-109.

[7] Y.H. Zhao, P. Ge, Y.Q. Zhao, G.J. Yang and J.H. Wen, Study on hot deformation behavior of Ti-1300 alloy, Rare Metal Mater. Eng. 38 (2009) 46-49.

[8] H. Ziegler, Progress in Solid Mechanics, in: I.N. Sneedon, R. Hill (Eds), New York, 1963, pp.63-193.

[9] S. Bruschi, S. Poggio, F. Quadrini and M.E. Tata, Workability of Ti-6Al-4V alloy at high temperatures and strain rates, Mater. Lett. 58 (2004) 3622-3629.

DOI: 10.1016/j.matlet.2004.06.058

[10] Y.V.R.K. Prasad, S. Sasidhara, Hot working guide: a compendium processing maps, ASM International, Materials park, OH (1997) 25-157.

[11] S.F. Liu, M.Q. Li, J. Luo and Z. Yang, Deformation behavior in the isothermal compression of Ti-5Al-5Mo-5V-1Cr-1Fe alloy, Mater. Sci. Eng. A. 589 (2014) 15-22.

DOI: 10.1016/j.msea.2013.09.066

[12] T. Seshacharyulu, S.C. Medeiros, W.G. Frazier and Y.V.R.K. Prasad, Hot working of commercial Ti-6Al-4V with an equiaxed α-β microstructure: materials modeling considerations, Mater. Sci. Eng. A. 284 (2000) 184-194.

DOI: 10.1016/s0921-5093(00)00741-3

[13] X.Y. Zhang, M.Q. Li, H. Li, J. Luo, S.B. Su and H. Wang, Deformation behavior in isothermal compression of the TC11 titanium alloy, Mater. Des. 31 (2010) 2851-2857.

DOI: 10.1016/j.matdes.2009.12.051