Characteristics of Thin-Film Transistors Fabricated by the Excimer Laser-Annealed Amorphous Silicon in Ultralow Oxygen Concentrations

Abstract:

To integrate circuits into the organic light emitting diode displays, it is necessary to fabricate polycrystalline silicon (poly-Si) based thin-film transistors (TFTs) on the glass substrates. In this work we investigated the correlation between the electrical characteristics and the poly-Si morphology of the excimer laser annealed (ELA) TFTs in ultralow oxygen concentrations (~ ppm). The main feature of ELA poly-Si films is the protrusion at grain boundaries that makes the film surface rough. The surface roughness increases with an increasing oxygen concentration during the laser annealing and degrades the TFT characteristics in the on-state as well as the breakdown voltage of the gate insulator, while the off current is independent of process conditions. This result is attributed to the increased oxygen incorporation in the film in the case of an ELA process. Since oxygen increased the defect density in the polysilicon bandgap, controlling the oxygen concentrations in the process chamber helped to improve the performance of the ELA poly-Si TFTs. Based on these results, we discuss the relationship between performance of active matrix organic light emitting display panels and oxygen concentrations during ELA.

• Periodical: Journal of Nano Research (Volume 49)
• Pages: 34-43
• DOI: https://doi.org/10.4028/www.scientific.net/JNanoR.49.34
• Online since: September 2017
• Authors: Hong Chan Lee, Kyoung Bo Kim, Moo Jin Kim*
• Keywords: Active Matrix Organic Light Emitting Diode Display, Excimer Laser Annealing, Oxygen Concentration, Polycrystalline Silicon, Thin Film Transistor

References

[1] G.H. Jin, S.M. Choi, M.J. Kim, S.C. Kim, J.H. Song, New Pixel Circuit Design Employing an Additional Pixel Line Insertion in AMOLED Displays Composed by Excimer Laser-Crystallized TFTs, J. Display Technol. 8 (2012) 479-482.

DOI: 10.1109/jdt.2012.2191533

[2] G.H. Jin, M.J. Kim, Characteristics of Excimer Laser-Annealed Thin-Film Transistors on the Polycrystalline Silicon Morphology Formed in the Single and Double (Overlap) Scanned Area, Jpn. J. Appl. Phys. 49 (041301) (2010) 1-4.

DOI: 10.1143/jjap.49.041301

[3] M.J. Kim, G.H. Jin, Effects of gate insulator using high pressure annealing on the characteristics of solid phase crystallized polycrystalline silicon thin-film transistors, J. Appl. Phys. 105 (074507) (2009) 1-4.

DOI: 10.1063/1.3103335

[4] G.J. Qi, S. Zhang, T.T. Tang, J.F. Li, X.W. Sun, X.T. Zeng, Experimental study of aluminum-induced crystallization of amorphous silicon thin films, Surf. Coat. Technol. 198 (2005) 300-303.

DOI: 10.1016/j.surfcoat.2004.10.092

[5] D.Y. Kim, J.M. Kim, J.S. Jung, J.Y. Kwon, H.S. Cho, K.B. Park, H. Lim, T. Noguchi, Oxygen Effect on Laser Crystallization of Sputtered a-Si Film on Plastic Substrate, Jpn. J. Appl. Phys. 45 (2006) L74-L76.

DOI: 10.1143/jjap.45.l74

[6] H. Watakabe, T. Sameshima, Polycrystalline silicon thin-film transistors fabricated by defect reduction methods, IEEE Trans. Electron Devices 49 (2002) 2217-2221.

DOI: 10.1109/ted.2002.805234

[7] F.S. Becker, D. Pawlik, H. Anzinger, A. Spitzer, Low‐pressure deposition of high‐quality SiO2 films by pyrolysis of tetraethylorthosilicate, J. Vac. Sci. Technol. B 5 (1987) 1555-1563.

DOI: 10.1116/1.583673

[8] N. Lifshitz, S. Luryi, Dependence of the off‐state current in polycrystalline silicon thin film on electric field in the channel, Appl. Phys. Lett. 64 (1994) 2114-2115.

DOI: 10.1063/1.111700

[9] P.J. van der Zaag, M.A. Verheijen, S.Y. Yoon, N.D. Young, Explanation for the leakage current in polycrystalline-silicon thin-film transistors made by Ni-silicide mediated crystallization, Appl. Phys. Lett. 81 (2002) 3404-3406.

DOI: 10.1063/1.1517406

[10] M.J. Kim, G.H. Jin, H.K. Min, H.K. Chung, S.S. Kim, J.H. Song, Effects of Excimer Laser Annealing Process on the Ni-Sputtered Amorphous Silicon Film, Electrochem. Solid-State Lett. 13 (2010) H346-H349.

DOI: 10.1149/1.3467972