Power Cycling Performance of 3.3 kV SiC-MOSFETs and the Impact of the Thermo-Mechanical Stress on Humidity Induced Degradation

Abstract:

Recently, silicon carbide (SiC) power modules of the 3.3 kV voltage class became available and are a promising candidate to replace silicon power modules in traction applications. However, the more than three times higher Young’s Modulus compared to silicon leads to a reduced lifetime under thermo-mechanical stress. This could pose a significant obstacle in their implementation, since traction applications are particularly demanding in their mission profiles with respect to load cycling, but also to environmental conditions. Thus, the thermo-mechanical stress is not just limiting the lifetime itself, but might also promote the humidity induced degradation due to delamination or micro-cracks. In this work, multiple power cycling tests at different temperature swings on 3.3 kV SiC MOSFET chips in a power module were performed, to assess their ruggedness under thermo-mechanical stress. Before or afterwards, these modules were tested under standard HV-H3TRB conditions to verify the interaction between thermo-mechanical and humidity stress on the robustness of the modules.

• Periodical: Solid State Phenomena (Volume 360)
• Pages: 195-204
• DOI: https://doi.org/10.4028/p-7NXWfs
• Online since: August 2024
• Authors: Michael Hanf*, Felix Hoffmann, Alexander Brunko, Jan Hendrik Peters, Sven Clausner, Nando Kaminski
• Keywords: Humidity, HV-H³TRB, Multi-Stress-Testing, PCT, Power Cycling, Reliability, Traction

References

[1] K. Hatori et al., Investigation of acceleration factors of the HV-H3TRB test on 3.3kV SiC SBDs, EPE'23, (2023)

[2] M. Hanf et al., Humidity Robustness of 3.3kV SiC-MOSFETs for Traction Applications – Compared to Standard Silicon IGBTs in Identical Packaging, Materials Science Forum Vol.1092, (2023)

DOI: 10.4028/p-clsosr

[3] E. Ceccarelli et al., Condensation Test: Methodology and Robustness Against it for Power Modules Employed in Railway Application, PCIM Europe 2023, (2023)

[4] P. Salmen et al., Qualifying a Silicon Carbide Power Module: Reliability Testing Beyond the Standards of Silicon Devices, CIPS'22, (2022)

[5] ECPE Guideline AQG 324, Qualification of Power Modules for Use in Power Electronics Converter Units in Motor Vehicles, (2021)

[6] F. Hoffmann et al., Reliability of SiC-MOSFET Power Modules under Consecutive H3TRB and Power Cycling Stress, Materials Science Forum Vol.1092, (2023)

DOI: 10.4028/p-3g1w6r

[7] Y. Wang et al., Influence of Humidity on the Power Cycling Lifetime of SiC MOSFETs, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 12, (2022)

DOI: 10.1109/tcpmt.2022.3223957

[8] F. Hoffmann et al., Comparison of the Power Cycling Performance of Silicon and Silicon Carbide Power Devices in a Baseplate Less Module Package at Different Temperature Swings, ISPSD'21, (2021)

DOI: 10.23919/ispsd50666.2021.9452242

[9] J.-H. Peters et al., Improved HV-H3TRB robustness of a 1700 V IGBT chip set in standard power modules, Microelectronics Reliability, Vol. 126, (2021)

DOI: 10.1016/j.microrel.2021.114211

[10] J. Leppaenen et al., Aluminum Corrosion in Power Semiconductor Devices, Microelectronics Reliability, Vol. 137, (2022)

[11] M. Hanf et al., H³TRB Test on 1.2 kV SiC MOSFETs, PCIM Europe 2018, (2018)

[12] F. Hoffmann et al., Comparison of the H3TRB Performance of Silicon and Silicon Carbide Power Modules, Materials Science Forum Vol.1062, (2021)

DOI: 10.4028/p-7j50kd

[13] C. Zorn et al., Temperature-humidity-bias testing on insulated-gate bipolartransistor modules – failure modes and acceleration due to high voltage, IET Vol. 8, Issue 12 (2015)

DOI: 10.1049/iet-pel.2015.0031

[14] ECPE Guideline PSRRA 01, Railway Applications HV-H3TRB tests for Power Semiconductor, (2019)

[15] C. Herold et al., Power cycling capability of Modules with SiC-Diodes, CIPS'14, (2014)

[16] R. Bayerer et al., Model for Power Cycling lifetime of IGBT Modules – various factors influencing lifetime, CIPS'08, (2008)

[17] F. Hoffmann et al., Lifetime Modeling of SiC MOSFET Power Modules During Power Cycling Tests at Low Temperature Swings, ISPSD'23, (2023)

DOI: 10.1109/ispsd57135.2023.10147533

[18] A. Streibel et al., Reliability of SiC MOSFET with Danfoss Bond Buffer Technology in Automotive Traction Power Modules, PCIM Europe 2019, (2019)