Applied Mechanics and Materials Vols. 644-650

Abstract: Original equiaxed 316L stainless steel coatings were successfully deposited by the low pressure plasma spray. For comparison, the coatings of 316L stainless steel with normal lamellar structure were also prepared by the air plasma spray (APS). The microstructures were investigated using optical micrograph (OM). The results show that the microstructures of LPPS 316L stainless steel coatings reveal the fine equiaxed microstructures like the solidified stainless steels,which are significantly different from that of APS coatings with lamellar structures.

Abstract: Very low pressure plasma spraying has been attracted attention due to special properties of the expanded plasma jet which may probably deposit specific and unique structure coatings, such as columnar structure coatings. The forming of the coatings is affected by plasma generating and working conditions. These operating parameters such as arc power, plasma gas flow rate, and chamber pressure have influences on pressure, enthalpy and temperature of plasma jet. In this work, an enthalpy probe is applied to measure the enthalpy of argon-hydrogen plasma jet generated at chamber pressure of 3000 Pa and 50Pa. The results showed that the temperature of plasma jet reached to 11000 K at 25 mm from nozzle exit, and then dropped slowly to 7000 K at 400 mm.

Abstract: Modern decorative materials constantly updated and developed, and many of them are limited tube used for a time, and soon are replaced or eliminated. Soft adornment material can shape and express art atmosphere of indoor, having huge advantages and functions. In this paper, we research and analyze the soft adornment material from different point of view, and making catch-all category on the function of indoor soft adornment material that will be used in art design environmental. Soft adornment material has a great influence on the indoor space, such as people's sense of feel, smell, etc. Also from the angle of the color and design, as well as the texture analysis to analyze the utilization of soft decoration materials in interior design, and emphasized on low carbon green theme, highlighting the new idea of interior design, and also excusing the advantages of the new material.

Abstract: The quality of forming model was influenced by the nozzle distance, during three dimensional printing. UV inkjet printer was used to complete 3D printing; the micro quality of printings under different nozzle distances were studied, and the influences of line attributes and surface attributes in micro quality caused by different nozzle distances were analyzed and discussed, in order to get the best micro quality through the nozzle distance setting. The results showed that the nozzle distance within a certain range, the influence on line attributes is greater than the influence on surface attributes caused by nozzle distance; when the nozzle distance is between 1.5-2.5mm, the micro quality of printed image is best.

Abstract: The use of sucrose and starch powder mixture is prepared by selective laser sintering forming parts mode, and the determination and calculation of dimensional accuracy and flexural strength of sintered parts. The results show, Sugar-based materials as raw materials can accumulate molding machine by SLS, and flexural strength and dimensional accuracy to meet the requirements.

Abstract: The Cu/Al composites are of vital importance in industrial applications due to their numerous advantages. The influence of the bonding temperature on the microstructure and morphology of the Cu/Al couples, fabricated using diffusion bonding method, is investigated in this paper. The interfacial morphology and constituent phases at the Cu/Al interface are analyzed by means of scanning electron microscopy equipped with energy dispersive X-ray spectroscopy. The results indicate that microstructural characteristics are associated with various bonding temperatures due to the accelerated inter-diffusion of atoms at higher temperature. The intermetallic layer is thicker with increasing the bonding temperature.

Abstract: Among the existing research findings, when the combination structure of manufacturing cloud service combination (MCSC) is formed, the actual situation of the service capability in cloud pool has not been objectively taken into account. It would result in service match failure. Aiming at a solution to this problem, this paper puts forward a view of forming a combination structure for MCSC based on business ontology, and focuses on how to build the business ontology. A case of USB flash disk customization is presented to verify the view.

Abstract: It was found that evaporation and thermal elastic stress wave and cavity were dominant phenomenon in laser-induced ablation propulsion with liquid propellant according to our perceptual knowledge established in relative experiment and by analysis of physical mechanism of laser-induced ablation of liquid. The research result of the above phenomenon was introduced in this paper in order to give some elicitations to the researchers who were interested in the mechanism of laser propulsion with liquid ablation.

Abstract: This paper bases on the principle of the stress hybrid element, using voronoi cell finite element method to analysis the interfacial debonding phenomenon of a particle reinforced composite materials, then it contrasts by the commercial finite element software MARC in the same conditions of numerical simulation. Research results show that: In the interfacial debonding, especially at the crack tip stress, Stress is the biggest. Particles and matrix interface delamination is the important cause of material damage, at the same time, it has a great impact on the service life of components.

Abstract: Based on the principle of electrochemical, the processing mechanism of electrochemical machining (ECM) micro holes is analyzed and discussed, the processing model is established and the quantitative relationship is presented between the machining side gap and the electrochemical machining parameters (pulse width and pulse period, pulse frequency, duty ratio, etc.), workpiece material parameters and the parameters of the electrolyte, the electric double layer equivalent circuit constant with mathematical expression. On the basis of the analysis of the effect of processing parameters on the electrochemical machining accuracy and stability, process out the variable cross-section micro hole at an appropriate processing parameters of variable pulse width.